CHAPTER 72: IRON AND STEEL
HS code	Description	Unit	Tariff General	Tariff EU	Tariff SADC
7201	PIG IRON ANDSPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY FORMS.
72011000	NON-ALLOY PIG IRON CONTAINING BY MASS 0,5 PER CENT OR LESS OF PHOSPHORUS	KG	free	free	free
72012000	NON-ALLOY PIG IRON CONTAINING BY MASS MORE THAN 0,5 PER CENT OF PHOSPHORUS	KG	free	free	free
72013000	ALLOY PIG IRON	KG
72014000	SPIEGELEISEN	KG
72015000	ALLOY PIG IRON; SPIEGELEISEN	KG	free	free	free
7202	FERRO-ALLOYS.
72021000	FERRO-MANGANESE:
72021100	CONTAINING BY MASS MORE THAN 2 PER CENT OF CARBON	KG	free	free	free
72021900	OTHER	KG	free	free	free
72022000	FERRO-SILICON:
72022100	CONTAINING BY MASS MORE THAN 55 PER CENT OF SILICON	KG	free	free	free
72022140	Ferro-alloys.- unspecified	KG
72022900	OTHER	KG	free	free	free
72023000	FERRO-SILICO-MANGANESE	KG	free	free	free
72024000	FERRO-CHROMIUM:
72024100	CONTAINING BY MASS MORE THAN 4 PER CENT OF CARBON	KG	free	free	free
72024900	OTHER	KG	free	free	free
72025000	FERRO-SILICO-CHROMIUM	KG	free	free	free
72026000	FERRO-NICKEL	KG	free	free	free
72027000	FERRO-MOLYBDENUM	KG	free	free	free
72028000	FERRO-TUNGSTEN AND FERRO-SILICO-TUNGSTEN	KG	free	free	free
72029000	OTHER:
72029100	FERRO-TITANIUM AND FERRO-SILICO-TITANIUM	KG	free	free	free
72029200	FERRO-VANADIUM	KG	free	free	free
72029300	FERRO-NIOBIUM	KG	free	free	free
72029900	OTHER	KG
72029910	FERRO-SILICO-MAGNESIUM	KG
72029920	FERRO-PHOSPHOROUS CONTAININGBY MASS 15 PER CENT OR MORE OF PHOSPHOROUS	KG
72029930	FERRO-SILICO-MAGNESIUM	KG	7%	7%	free
72029990	OTHER	KG	free	free	free
7203	FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTIONOF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR SIMILAR FORMS; IRON HAVINGA MINIMUM PURITY BY MASS OF 99,94 %, IN LUMPS, PELLETS OR SIMILAR FORMS.
72031000	FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE	KG	free	free	free
72039000	OTHER	KG	free	free	free
7204	FERROUS WASTEAND SCRAP; REMELTING SCRAP INGOTS OF IRON OR STEEL.
72041000	WASTE AND SCRAP OF CAST IRON	KG	free	free	free
72042000	WASTE AND SCRAP OF ALLOY STEEL:
72042100	OF STAINLESS STEEL	KG	free	free	free
72042900	OTHER	KG	free	free	free
72043000	WASTE AND SCRAP OF TINNED IRON OR STEEL	KG	free	free	free
72044000	OTHER WASTE AND SCRAP:
72044100	TURNINGS, SHAVINGS, CHIPS, MILLING WASTE, SAWDUST, FILINGS, TRIMMINGS AND STAMPINGS, WHETHER ORNOT IN BUNDLES		free	free	free
72044900	OTHER	KG	free	free	free
72045000	REMELTING SCRAP INGOTS	KG	free	free	free
72045010	OF HIGH CARBON STEEL	KG
72045020	OF STAINLESS STEEL ,CONTAINING BY MASS, 12 PERCENT OR MORE CHROMIUM AND LESS THAN 1 PER CENT CARBON	KG
72045090	OTHER	KG
7205	GRANULES AND POWDERS, OFPIG IRON, SPIEGELEISEN, IRON OR STEEL.
72051000	GRANULES	KG	free	free	free
72051010	SHOT AND GRIT	KG
72051090	OTHER	KG
72051095	Shot and grift of heading 72.05	KG
72052000	POWDERS:
72052100	OF ALLOY STEEL	KG	free	free	free
72052900	OTHER	KG	free	free	free
7206	IRON AND NON-ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS (EXCL. IRONOF HEADING NO. 72.03).
72061000	INGOTS	KG	free	free	free
72061010	CONTAINING BY MASS 0,6 PERCENT OR MORE OF CARBON	KG
72061090	Other	KG
72069000	OTHER	KG	free	free	free
7207	SEMI-FINISHED PRODUCTS OR IRON ORNON-ALLOY STEEL.
72071000	CONTAINING BY MASS LESS THAN0,25 % OF CARBON:
72071100	OF RECTANGULAR (INCLUDING SQUARE) CROSS-SECTION, THE WIDTH MEASURING LESS THAN TWICE THE THICKNESS		free	free	free
72071110	PIECES ROUGHLY SHAPED BY FORGING	KG
72071190	Other	KG
72071200	OTHER, OF RECTANGULAR (EXCLUDING SQUARE) CROSS-SECTION	KG	free	free	free
72071210	PIECES ROUGHLY SHAPED BY FORGING	KG
72071290	OTHER	KG
72071900	OTHER	KG	free	free	free
72071910	PIECES ROUGHLY SHAPED BY FORGING	KG
72071990	OTHER	KG
72072000	CONTAINING BY MASS 0,25 PER CENT OR MORE OF CARBON	KG	free	free	free
72072010	RU GEVORMDE STUKKE DEUR SMEDING VERKRY, WAT VOLGENS MASSA, MINSTENS O,6 PERSENT KOOLSTOF BEVAT /	KG
72072020	PIECES ROUGHLY SHAPED BY FORGING, CONTAINING BY MASS, LESS THAN 0,6 PERCENT CARBON	KG
72072030	OTHER , CONTAINING BY MASS, EXCEEDING 0,6 CARBON	KG
72072090	ANDER // OTHER	KG
7208	FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOYSTEEL, OF A WIDTH OF 600 MM OR MORE, HOT-ROLLED, NOT CLAD, PLATED OR COATED.
72081000	IN COILS, NOT FURTHER WORKED THAN HOT-ROLLED, WITH PATTERNS IN RELIEF	KG	5%	5%	free
72081100	OF A THICKNESS EXCEEDING 10 MM	KG
72081110	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72081190	OTHER	KG
72081200	OF A THICKNESS OF 4,75 MM OR MOREBUT NOT EXCEEDING 10 MM:	KG
72081210	CONTAINING BY MASS0,6 PER CENT OR MORE OR CARBON	KG
72081290	OTHER	KG
72081300	OF A THICKNESS OF 3 MM OR MORE BUTLESS THAN 4,75 MM:	KG
72081310	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72081390	OTHER	KG
72081400	OF A THICKNESS OF LESS THAN 3 MM:	KG
72081410	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72081490	OTHER	KG
72082000	OTHER, IN COILS, NOT FUTHER WORKED THAN HOT-ROLLED, PICKED:
72082100	OF A THICKNESS EXCEEDING 10 MM:	KG
72082110	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72082190	OTHER	KG
72082200	OF A THICKNESS OF 4,75 MM OR MOREBUT NOT EXCEEDING 10 MM:	KG
72082210	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72082290	OTHER	KG
72082300	OF A THICKNESS OF 3 MM OR MOREBUT LESS THAN 4,75 MM:	KG
72082310	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72082390	OTHER	KG
72082400	OF A THICKNESS OF LESS THAN 3 MM:	KG
72082410	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72082490	OTHER	KG
72082500	OF A THICKNESS OF 4,75 MM OR MORE	KG	5%	5%	free
72082600	OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4,75 MM	KG	5%	5%	free
72082700	OF A THICKNESS OF LESS THAN 3 MM	KG	5%	5%	free
72083000	OTHER, IN COILS, NOT FUTHER WORKEDTHAN HOT-ROLLED:
72083100	ROLLED ON FOUR FACES OR IN A CLOSED BOXPASS, OF A WIDTH NOT EXC. 1 250 MM AND OF A THICKNESS OF NOT LESS THAN 4 MM, WITHOUTPATTERNS IN RELIEF:	KG
72083110	OF A THICKNESS EXC 5 MM AND CONTAINING BY MASS 0,6 %OR MORE OF CARBON	KG
72083120	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72083190	OTHER	KG
72083200	OTHER, OF A THICKNESS EXCEEDING 10 MM:	KG
72083210	ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL,CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72083220	OTHER,CONTAINING BY MASS OF 0,6 PER CENT OR MORE OF CARBON	KG
72083290	OTHER	KG
72083300	OTHER, OF A THICKNESS OF4,75 MM OR MORE BUT NOT EXC. 10 MM:	KG
72083310	ROLLED IN A CLOSEDBOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC 5 MM AND CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72083320	OTHER,CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72083390	OTHER	KG
72083400	OTHER, OF A THICKNESS OF 3 MMOR MORE BUT LESS THAN 4,75 MM:	KG
72083410	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72083490	OTHER	KG
72083500	OTHER, OF A THICKNESS OF LESS THAN 3 MM:	KG
72083510	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72083590	OTHER	KG
72083600	OF A THICKNESS EXCEEDING 10 MM	KG	5%	5%	free
72083700	OF A THICKNESS OF 4,75 MM OR MORE BUT NOT EXCEEDING 10 MM	KG	5%	5%	free
72083800	OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4,75 MM	KG	5%	5%	free
72083900	OF A THICKNESS OF LESS THAN 3 MM	KG	5%	5%	free
72084000	NOT IN COILS, NOT FURTHER WORKED THAN HOT-ROLLED, WITH PATTERNS IN RELIEF	KG	5%	5%	5%
72084100	ROLLED ON FOUR FACES OR IN A CLOSED BOXPASS, OF A WIDTH NOT EXC. 1 250 MM AND OF A THICKNESS OF NOT LESS THAN 4 MM, WITHOUTPATTERNS IN RELIEF:	KG
72084110	OF A THICKNESS EXC 5 MM AND CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72084120	OF A THICKNESS EXC 5 MM AND CONTAINING BY MASS LESS THAN 0,6 PER CENT OF CARBON	KG
72084130	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72084190	OTHER	KG
72084200	OTHER, OF A THICKNESS EXCEEDING 10 MM:	KG
72084210	ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL AND CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72084220	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72084290	OTHER	KG
72084300	OTHER, OF A THICKNESS OF4,75 MM OR MORE BUT NOT EXC. 10 MM:	KG
72084310	ROLLED IN A CLOSEDBOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC 5 MM AND CONTAINING BY MASS 0,6PER CENT OR MORE OF CARBON	KG
72084320	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72084390	OTHER	KG
72084400	OTHER, OF A THICKNESS OF 3 MMOR MORE BUT LESS THAN 4,75 MM:	KG
72084410	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72084490	OTHER	KG
72084500	OTHER, OF A THICKNESS OF LESS THAN 3 MM:	KG
72084510	CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72084590	OTHER	KG
72085000	OTHER, NOT IN COILS, NOT FURTHERWORKED THAN HOT-ROLLED
72085100	OF A THICKNESS EXCEEDING 10 MM	KG	5%	5%	free
72085200	OF A THICKNESS OF 4,75 MM OR MORE BUT NOT EXCEEDING 10 MM	KG	5%	5%	free
72085300	OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4,75 MM	KG	5%	5%	free
72085400	OF A THICKNESS OF LESS THAN 3 MM	KG	5%	5%	free
72089000	OTHER	KG	5%	5%	free
72089010	ROLLED IN A CLOSED BOX PASS ORAUNIVERSAL MILL, OF A THICKNESS EXC. 5 MM AND CONTAINING BY MASS 0,6 % OR MORE OF CARBON	KG
72089020	OTHER,CONTAINING BY MASS 0,6 % OR MORE OF CARBON, NOT CORRUGATED	KG
72089030	OTHER, CONTAININGBY MASS 0,6 % OR MORE OF CARBON, CORRUGATED	KG
72089040	OTHER, NOT CORRUGATED	KG
72089090	OTHER	KG
7209	FLAT-ROLLED PRODUCTS OFIRON OR NON-ALLOY STEEL OF A WIDTH OF 600 MM OR MORE, COLD-ROLLED (COLD-REDUCED), NOT CLAD,PLATED OR COATED.
72091000	IN COILS, NOT FURTHER WORKED THANCOLD-ROLLED (COLD-REDUCED):
72091100	OF A THICKNESS OF 3 MM OR MORE:	KG
72091110	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72091190	OTHER	KG
72091200	OF A THICKNESS EXC. 1 MM BUT LESSTHAN 3 MM:	KG
72091210	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72091290	OTHER	KG
72091300	OF A THICKNESS OF 0,5 MM OR MOREBUT NOT EXCEEDING 1 MM:	KG
72091310	CONTAINING BY MASS0,6 % OR MORE OF CARBON	KG
72091390	OTHER	KG
72091400	OF A THICKNESS OF LESS THAN 0,5 MM:	KG
72091410	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72091490	OTHER	KG
72091500	OF A THICKNESS OF 3 MM OR MORE	KG	5%	5%	free
72091600	OF A THICKNESS EXCEEDING 1 MM BUT LESS THAN 3 MM	KG	5%	5%	free
72091700	OF A THICKNESS OF 0,5 MM OR MORE BUT NOT EXCEEDING 1 MM	KG	5%	5%	free
72091800	OF A THICKNESS OF LESS THAN 0,5 MM	KG	5%	5%	free
72092000	NOT IN COILS, NOT FURTHERWORKED THAN COLD-ROLLED (COLD-REDUCED):
72092100	OF A THICKNESS OF 3 MM OR MORE:	KG
72092110	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72092190	OTHER	KG
72092200	OF A THICKNESS EXC. 1 MM BUT LESSTHAN 3 MM:	KG
72092210	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72092290	OTHER	KG
72092300	OF A THICKNESS OF 0,5 MM OR MORE BUTNOT EXC. 1 MM:	KG
72092310	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72092390	OTHER	KG
72092400	OF A THICKNESS OF LESS THAN 0,5 MM:	KG
72092410	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72092490	OTHER	KG
72092500	OF A THICKNESS OF 3 MM OR MORE	KG	5%	5%	free
72092600	OF A THICKNESS EXCEEDING 1 MM BUT LESS THAN 3 MM	KG	5%	5%	free
72092700	OF A THICKNESS OF 0,5 MM OR MORE BUT NOT EXCEEDING 1 MM	KG	5%	5%	free
72092800	OF A THICKNESS OF LESS THAN 0,5 MM	KG	5%	5%	free
72093000	NOT IN COILS, NOT FURTHER WORKED THAN COLD-ROLLED(COLD-REDUCED), OF A THICKNESS OF LESS THAN 3 MM AND HAVING A MINIMUM YIELD POINT OF 275 MPA OROF A THICKNESS OF 3 MM OR MORE AND HAVING A MINIMUM YIELD POINT OF 355 MPA:
72093100	OF A THICKNESS OF 3 MM OR MORE:	KG
72093110	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72093190	OTHER	KG
72093200	OF A THICKNESS EXC. 1 MM BUT LESSTHAN 3 MM:	KG
72093210	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72093290	OTHER	KG
72093300	OF A THICKNESS OF 0,5 MM OR MORE BUTNOT EXC. 1 MM:	KG
72093310	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72093390	OTHER	KG
72093400	OF A THICKNESS OF LESS THAN 0,5 MM:	KG
72093410	CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72093490	OTHER	KG
72094000	OTHER, NOT INCOILS, NOT FURTHER WORKED THAN COLD-ROLLED (COLD-REDUCED):
72094100	OF A THICKNESS OF 3 MM OR MORE:	KG
72094110	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72094190	OTHER	KG
72094200	OF A THICKNESS EXC. 1 MM BUT LESSTHAN 3 MM:	KG
72094210	CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72094290	OTHER	KG
72094300	OF A THICKNESS OF 0,5 MM OR MORE BUTNOT EXC. 1 MM:	KG
72094310	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72094390	OTHER	KG
72094400	OF A THICKNESS OF LESS THAN 0,5 MM:	KG
72094410	CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72094490	OTHER	KG
72099000	OTHER	KG	5%	5%	free
72099010	CONTAINING BY MASS 0,6 % OR MORE OF CARBON, NOT CORRUGATED	KG
72099020	CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON, CORRUGATED	KG
72099030	OTHER, NOT CORRUGATED	KG
72099090	OTHER	KG
7210	FLAT-ROLLED PRODUCTS OF IRON OR NON ALLOY STEEL, OF A WIDTH OF 600 MMOR MORE, CLAD, PLATED OR COATED:
72101000	PLATED OR COATED WITH TIN:
72101100	OF A THICKNESS OF 0,5 MM OR MORE	KG	free	free	free
72101110	HOT-ROLLED IN ACLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC 5 MM AND CONTAINING BYMASS 0,6 PER CENT OR MORE OF CARBON	KG
72101120	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON, NOT CORRUGATED	KG
72101130	OTHER,CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72101140	OTHER, NOT CORRUGATED	KG
72101190	OTHER	KG
72101200	OF A THICKNESS OF LESS THAN 0,5 MM	KG	5%	5%	free
72101210	CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON, NOT CORRUGATED	KG
72101220	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72101230	OTHER, NOT CORRUGATED	KG
72101290	OTHER	KG
72102000	PLATED OR COATED WITH LEAD, INCLUDING TERNE-PLATE	KG	free	free	free
72102010	HOT-ROLLED IN A CLOSED BOX PASSOR A UNIVERSAL MILL, OF A THICKNESS EXC. 5 MM & CONTAINING BY MASS 0,6 % OR MORE OF CARBON	KG
72102020	OTHER, CONTAINING BY MASS 0,6 % OR MORE OF CARBON, NOT CORRUGATED	KG
72102030	OTHER, CONTAINING BY MASS0,6 % OR MORE OF CARBON	KG
72102040	OTHER, NOT CORRUGATED	KG
72102090	OTHER	KG
72103000	ELECTROLYTICALLY PLATED OR COATED WITH ZINC	KG	5%	5%	free
72103100	OF STEEL OF ATHICKNESS OF LESS THAN 3 MM AND HAVING A MINIMUM YIELD POINT OF 275 MPA OR OF A THICKNESS OF3 MM OR MORE AND HAVING A MINIMUM YIELD POINT OF 355 MPA:	KG
72103110	HOT-ROLLED IN ACLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC 5 MM AND CONTAINING BYMASS 0,6 % OR MORE OF CARBON	KG
72103120	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON, NOT CORRUGATED	KG
72103130	OTHER,CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72103140	OTHER, NOT CORRUGATED	KG
72103190	OTHER	KG
72103900	OTHER:	KG
72103910	HOT-ROLLED INA CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC 5 MM AND CONTAINING BYMASS 0,6 PER CENT OR MORE OF CARBON	KG
72103920	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON, NOT CORRUGATED	KG
72103930	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72103940	OTHER, NOT CORRUGATED	KG
72103990	OTHER	KG
72104000	OTHERWISE PLATED OR COATED WITH ZINC:
72104100	CORRUGATED	KG	5%	5%	free
72104110	CONTAINING, BY MASS,0,6 PER CENT OR MORE OF CARBON	KG
72104190	OTHER	KG
72104900	OTHER	KG	5%	5%	free
72104910	HOT-ROLLED INA CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC 5 MM AND CONTAINING BYMASS 0,6 PER CENT OR MORE OF CARBON	KG
72104920	OTHER,CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72104990	OTHER	KG
72105000	PLATED OR COATED WITH CHROMIUM OXIDES OR WITH CHROMIUM AND CHROMIUM OXIDES	KG	5%	5%	free
72105010	CONTAINING BY MASS 0,6 % OR MORE OF CARBON, NOT CORRUGATED	KG
72105020	OTHER, CONTAINING BY MASS 0,6 % OR MORE OF CARBON	KG
72105030	OTHER, PLATED OR COATED WITH CHROMIUM OXIDES	KG
72105090	OTHER	KG
72106000	PLATED OR COATED WITH ALIMINUM:
72106010	HOT-ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC. 5 MM AND CONTAINING BY MASS 0,6 % OR MORE OF	KG
72106020	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72106090	OTHER	KG
72106100	PLATED OR COATED WITH ALUMINIUM-ZINC ALLOYS	KG	free	free	free
72106900	OTHER	KG	free	free	free
72107000	PAINTED, VARNISHED OR COATED WITH PLASTICS	KG	5%	5%	free
72107010	HOT-ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC. 5 MM AND CONTAINING BY MASS 0,6 % OR MORE OF CARBON	KG
72107020	OTHER, CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72107030	OTHER, PAINTED OR VARNISHED	KG
72107090	OTHER	KG
72109000	OTHER	KG	5%	5%	free
72109010	HOT-ROLLED IN A CLOSED BOX PASS OR AUNIVERSAL MILL, OF A THICKNESS EXC. 5 MM AND CONTAINING BY MASS 0,6 % OR MORE OF	KG
72109020	OTHER, CONTAINING BY MASS 0,6 % OR MORE OF CARBON, PLATED OR COATED WITH NICKEL OR COPPER, NOT CORRUGATED	KG
72109030	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72109040	OTHER, PLATED OR COATED WITH NICKEL OR COPPER	KG
72109050	OTHER PRINTED LITHOGRAPHED OREMBOSSED	KG
72109090	OTHER	KG
7211	FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF AWIDTH OF LESS THAN 600 MM, NOT CLAD, PLATED OR COATED.
72110104	Flat-rolled products of iron or non-alloysteel, of a width of less than 600mm, notclad, plated or coated, for the manufactureof handsaws of subheading no. 8202.10	KG
72111000	NOT FURTHER WORKED THAN HOT-ROLLED:
72111100	ROLLED ON FOUR FACESOR IN A CLOSED BOX PASS, OF A WIDTH EXC. 150 MM & A THICKNESS OF NOT LESS THAN 4 MM, NOTIN COILS AND WITHOUT PATTERNS IN RELIEF:	KG
72111110	ROLLED IN ACLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC 5 MM AND CONTAINING BYMASS 0,6 PER CENT OR MORE OF CARBON	KG
72111120	OTHER,CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72111130	OTHER, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL AND OF ATHICKNESS EXC 5 MM	KG
72111140	OTHER FLATTENED BARS AND RODS	KG
72111190	OTHER	KG
72111200	OTHER, OF A THICKNESS OF 4,75 MM OR MORE:	KG
72111210	ROLLED IN A CLOSEDBOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC 5 MM AND CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72111220	OTHER,CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72111230	OTHER, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL AND OF ATHICKNESS EXC 5 MM	KG
72111240	OTHER FLATTENED BARS AND RODS	KG
72111290	OTHER	KG
72111300	ROLLED ON FOUR FACES OR IN A CLOSED BOX PASS, OF A WIDTH EXCEEDING 150 MM AND A THICKNESS OF NOTLESS THAN 4 MM, NOT IN COILS AND WITHOUT PATTERNS IN RELIEF		5%	5%	free
72111400	OTHER, OF A THICKNESS OF 4,75 MM OR MORE	KG	5%	5%	free
72111900	OTHER	KG	5%	5%	free
72111910	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72111920	OTHER FLATTENED BARS AND RODS	KG
72111990	OTHER	KG
72112000	NOT FURTHER WORKED THAN COLD-ROLLED(COLD-REDUCED)
72112100	ROLLED ON FOURFACES OR IN A CLOSED BOX PASS, OF A WIDTH EXC. 150 MM AND A THICKNESS OF NOT LESS THAN 4MM, NOT IN COILS AND WITHOUT PATTERNS IN RELIEF:	KG
72112110	ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXCEEDING 5 MM AND CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72112120	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72112130	OTHER, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXCEEDING 5 MM	KG
72112140	OTHER FLATTENED BARS AND RODS	KG
72112190	OTHER	KG
72112200	OTHER, OF A THICKNESS OF 4,75 MM OR MORE:	KG
72112210	ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC. 5 MM & CONTAINING BY MASS 0,6 % OR MORE OF CARBON	KG
72112220	OTHER CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72112230	OTHER, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXCEEDING 5 MM	KG
72112240	OTHER FLATTENED BARS AND RODS	KG
72112290	OTHER	KG
72112300	CONTAINING BY MASS LESS THAN 0,25 PER CENT OF CARBON	KG	5%	5%	free
72112900	OTHER	KG	5%	5%	free
72112910	CONTAINING BY MASS0,6 % OR MORE OF CARBON	KG
72112920	OTHER FLATTENED BARS AND RODS	KG
72112990	OTHER	KG
72113000	NOT FURTHER WORKED THAN COLD-ROLLED (COLD-REDUCED), OF A THICKNESS OFLESS THAN 3 MM AND HAVING A MINIMUM YIELD POINT OF 275 MPA OR OF A THICKNESS OF 3 MM OR MOREAND HAVING A MINIMUM YIELD POINT OF 355 MPA:	KG
72113010	CONTAINING BY MASS 0,6 %OR MORE OF CARBON	KG
72113090	OTHER	KG
72114000	OTHER, NOT FURTHER WORKED THANCOLD-ROLLED (COLD-REDUCED):
72114100	CONTAINING BY MASS LESS THAN 0,25% OF CARBON	KG
72114900	OTHER:	KG
72114910	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72114990	OTHER	KG
72119000	OTHER	KG	5%	5%	free
72119010	CONTAINING BY MASS 0,6 % OR MORE OF CARBON, OF A LENGTH NOT EXC. 3 M, A WIDTH NOT EXC. 250 MM AND A THICKNESS OF 3 MM OR MORE BUT NOT EXC. 30 MM, SEPARATED FROM EACH OTHER BY PACKING	KG
72119020	OTHER, CONTAINING BY MASS 0,6 % OR MORE OF CARBON, WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72119030	OTHER, CONTAINING BY MASS0,6 % OR MORE OF CARBON	KG
72119040	OTHER FLATTENED BARS AND RODS	KG
72119050	OTHER, WITH A CORRUGATED OR OTHER PROFILECONFIGURATION	KG
72119090	OTHER	KG
7212	FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTHOF LESS THAN 600 MM, CLAD, PLATED OR COATED.
72121000	PLATED OR COATED WITH TIN
72121010	Of a thickness of 0,5 mm or more	KG	free	free	free
72121020	Of a thickness of less than 0,5 mm	KG	5%	5%	free
72121030	OTHER, CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72121090	OTHER	KG
72122000	ELECTROLYTICALLY PLATED OR COATED WITH ZINC	KG	5%	5%	free
72122100	OF STEEL OF A THICKNESSOF LESS THAN 3 MM AND HAVING A MINIMUM YIELD POINT OF 275 MPA OR OF A THICKNESS OF 3 MM OR MORE AND HAVING A MINIMUM YIELD POINT OF 355 MPA:	KG
72122110	HOT-ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC. 5 MM AND CONTAINING BY MASS 0,6 % OR MORE OF CARBON	KG
72122120	OTHER, CONTAINING BY MASS 0,6 % OR MORE OF CARBON	KG
72122190	OTHER	KG
72122900	OTHER:	KG
72122910	HOT-ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXCEEDING 5 MM AND CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72122920	OTHER,CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72122990	OTHER	KG
72123000	OTHERWISE PLATED OR COATED WITH ZINC	KG	5%	5%	free
72123010	HOT-ROLLED IN A CLOSED BOX PASS OR AUNIVERSAL MILL, OF A THICKNESS EXC. 5 MM AND CONTAINING BY MASS 0,6 % OR MORE OF	KG
72123020	OTHER, CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72123090	OTHER	KG
72124000	PAINTED, VARNISHED OR COATED WITH PLASTICS	KG	5%	5%	free
72124010	HOT-ROLLED IN A CLOSED BOX PASS OR AUNIVERSAL MILL, OF A THICKNESS EXC. 5 MM AND CONTAINING BY MASS 0,6 % OR MORE OF	KG
72124020	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72124030	OTHER, OF A WIDTH EXCEEDING 500 MM, PAINTED OR VARNISHED	KG
72124090	OTHER	KG
72125000	OTHERWISE PLATED OR COATED	KG	free	free	free
72125005	PRINTED LITHOGRAPHED OR EMBOSSED	KG
72125010	HOT-ROLLED IN A CLOSED BOX PASS OR AUNIVERSAL MILL, OF A THICKNESS EXC. 5 MM AND CONTAINING BYMASS 0,6 % OR MORE OF CARBON	KG
72125015	Flat-rolled products of iron or non-alloy steel, of a width of less than - 600 mm, clad, plated or coated.- plated or coated with lead or aluminium	KG
72125020	OTHER, CONTAINING 0,6 PER CENT OR MORE BY MASS OF CARBON, PLATED OR COATED WITH LEAD	KG
72125030	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON, PLATED ORCOATED WITH CHROMIUM, NICKEL OR COPPER	KG
72125040	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72125050	OTHER, PLATED OR COATED WITH LEAD, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72125060	OTHER, PLATED OR COATED WITH LEAD	KG
72125070	OTHER, PLATED OR COATEDWITH CHROMIUM, NICKEL OR COPPER	KG
72125080	OTHER, OF AWIDTH EXCEEDING 500 MM, PLATED OR COATED WITH ALUMINIUM	KG
72125085	OTHEROF A WIDTH EXC. 500 MM PRINTED LITHOGRAPHED OR EMBOSSED	KG
72125090	OTHER	KG
72126000	CLAD	KG	free	free	free
72126005	HOT-ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, OF A THICKNESS EXC. 5 MM AND CONTAINING BY MASS 0,6 % OR MORE OF CARBON	KG
72126010	OTHER, CONTAINING BY MASS 0,6 % OR MORE OF CARBON, CLAD WITH CHROMIUM, NICKEL OR COPPER, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72126015	OTHER, CONTAINING BY MASS 0,6 % OR MORE OF CARBON, CLAD WITH LEAD OR ZINC	KG
72126020	OTHER, CONTAINING BY MASS 0,6 % OR MORE OF CARBON AND OF A WIDTH NOT EXC. 500 MM, CLAD WITH TIN	KG
72126025	OTHER, CONTAINING BY MASS 0,6 PER CENT OR MORE OF CARBON, CLAD WITH TIN, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72126030	OTHER, CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72126035	OTHER, CLAD WITH ZINC	KG
72126040	OTHER, CLAD WITH LEAD, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72126045	OTHER, CLAD WITH CHROMIUM, NICKEL OR COPPER	KG
72126050	OTHER, OF A WIDTH EXCEEDING500 MM, CLAD WITH ALUMINIUM	KG
72126090	OTHER	KG
7213	BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF IRONOR NON-ALLOY STEEL.
72131000	CONTAINING INDENTATIONS, RIBS, GROOVES OR OTHER DEFORMATIONS PRODUCED DURING THE ROLLING PROCESS	KG	5%	5%	free
72131010	CONTAINING BY MASS 0,6PERCENT OR MORE OF CARBON	KG
72131090	OTHER	KG
72132000	OTHER, OF FREE-CUTTING STEEL	KG	5%	5%	free
72132010	CONTAINING BY MASS 0,6 PERCENT OR MORE OF CARBON	KG
72132090	OTHER	KG
72133000	OTHER, CONTAINING BY MASSLESS THAN 0,25 % OF CARBON:
72133100	OFCIRCULAR CROSS-SECTION MEASURING LESS THAN 14 MM IN DIAMETER	KG
72133900	OTHER	KG
72134000	OTHER, CONTAINING BY MASS 0,25 PER CENT OR MORE BUT LESS THAN 0,6 PER CENT OF CARBON:
72134100	OFCIRCULAR CROSS-SECTION MEASURING LESS THAN 14 MM IN DIAMETER	KG
72134900	OTHER	KG
72135000	OTHER CONTAININGBY MASS 0,6 PER CENT OR MORE OF CARBON	KG
72139000	OTHER:
72139100	OF CIRCULAR CROSS-SECTION MEASURING LESS THAN 14 MM IN DIAMETER	KG	5%	5%	free
72139900	OTHER	KG	5%	5%	free
7214	THER BARS AND RODS OF IRON OR NON-ALLOY STEEL, NOT FURTHER WORKED THAN FORGED, HOT-ROLLED,HOT-DRAWN OR HOT-EXTRUDED, BUT INCL. THOSE TWISTED AFTER ROLLING.
72141000	FORGED	KG	5%	5%	free
72141010	WITH A CROSS-SECTION IN THE SHAPE OF "FLATTENDEDCIRCLES" OR "MODIFIED RECTANGLES" AS DEFINED IN NOTE 1(M) TO THIS CHAPTER
72141090	OTHER	KG
72142000	CONTAINING INDENTATIONS, RIBS, GROOVES OR OTHER DEFORMATIONS PRODUCED DURING THE ROLLING PROCESSOR TWISTED AFTER ROLLING		5%	5%	free
72142010	CONTAINING BY MASS 0,6PER CENT OR MORE OF CARBON	KG
72142020	CONTAININGBY MASS LESS THAN 0,6 PER CENT OF CARBON HOT ROLLED	KG
72142090	OTHER	KG
72143000	OF FREE-CUTTING STEEL	KG	5%	5%	free
72143010	CONTAINING BY MASS 0,6 %ORMORE OF CARBON	KG
72143020	CONTAININGBY MASS LESS THAN 0,6 PER CENT OF CARBON HOT ROLLED	KG
72143090	OTHER	KG
72144000	OTHER, CONTAINING BYMASS LESS THAN 0,25 PER CENT OF CARBON
72144010	HOT ROLLED	KG
72144090	OTHER	KG
72145000	OTHER, CONTAINING BY MASS 0,25 PERCENT OR MORE BUT LESS THAN 0,6 PERCENT OF CARBON
72145010	HOT ROLLED	KG
72145090	OTHER	KG
72146000	OTHER, CONTAINING BY MASS0,6 % OR MORE OF CARBON
72149000	OTHER:
72149100	OF RECTANGULAR (EXCLUDING SQUARE) CROSS-SECTION	KG	5%	5%	free
72149900	OTHER	KG	5%	5%	free
7215	OTHER BARS AND RODS OF IRON ORNON-ALLOY STEEL.
72151000	OF FREE-CUTTING STEEL, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED	KG	5%	5%	free
72151010	CONTAINING BY MASS 0,6 %OR MORE OF CARBON	KG
72151090	OTHER	KG
72152000	OTHER, NOT FURTHER WORKED THAN COLD-FORMED OR COLD- FINISHED,CONTAINING BY MASS LESS THAN 0,25 PER CENT OF CARBON	KG
72153000	OTHER, NOT FURTHER WORKED THANCOLD-FORMED OR COLD- FINISHED, CONTAINING BY MASS 0,25 % OR MORE BUT LESS THAN 0,6 PERCENT OF CARBON	KG
72154000	OTHER, NOT FURTHER WORKED THAN COLD-FORMED OR COLD- FINISHED,CONTAINING BY MASS 0,6 % OR MORE OF CARBON	KG
72155000	OTHER, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED	KG	5%	5%	free
72159000	OTHER	KG	5%	5%	free
72159010	CONTAINING BY MASS 0,6 %OR MORE OF CARBON	KG
72159020	CONTAININGBY MASS LESS THAN 0,6 PER CENT OF CARBON HOT ROLLED	KG
72159090	OTHER	KG
7216	ANGLES, SHAPES AND SECTIONS OFIRON OR NON-ALLOY STEEL.
72161000	U, I OR H SECTIONS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED, OF A HEIGHT OF LESS THAN 80 MM		5%	5%	free
72161010	CONTAINING BY MASS 0,6 %OR MORE OF CARBON	KG
72161090	OTHER	KG
72162000	L OR T SECTIONS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OREXTRUDED, OF A HEIGHT OF LESS THAN 80 MM:
72162100	L SECTIONS	KG	5%	5%	free
72162110	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72162190	OTHER	KG
72162200	T SECTIONS	KG	5%	5%	free
72162210	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72162290	OTHER	KG
72163000	U, I OR H SECTIONS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWNOR EXTRUDED, OF A HEIGHT OF 80 MM OR MORE:
72163100	U SECTIONS	KG	5%	5%	free
72163110	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72163190	OTHER	KG
72163200	I SECTIONS	KG	5%	5%	free
72163210	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72163290	OTHER	KG
72163300	H SECTIONS	KG	5%	5%	free
72163310	CONTAINING BY MASS0,6 PER CENT OR MORE OF CARBON	KG
72163390	OTHER	KG
72164000	L OR T SECTIONS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED, OF A HEIGHT OF 80 MMOR MORE		5%	5%	free
72164010	CONTAINING BY MASS 0,6 %OR MORE OF CARBON	KG
72164090	OTHER	KG
72165000	OTHER ANGLES, SHAPES AND SECTIONS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED	KG	5%	5%	free
72165010	CONTAINING BY MASS 0,6 %OR MORE OF CARBON	KG
72165090	OTHER	KG
72166000	ANGLES,SHAPES AND SECTIONS, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED:
72166010	CONTAINING BY MASS 0,6 %OR MORE OF CARBON	KG
72166090	OTHER	KG
72166100	OBTAINED FROM FLAT-ROLLED PRODUCTS	KG	5%	5%	5%
72166700	Obtained from flat-rolled products	KG
72166900	OTHER	KG	5%	5%	free
72169000	OTHER:
72169010	CONTAINING BY MASS 0,6 % ORMORE OF CARBON	KG
72169020	OTHER, COLD-FORMED OR COLD-FINISHED	KG
72169090	OTHER	KG
72169100	COLD-FORMED OR COLD-FINISHED FROM FLAT-ROLLED PRODUCTS	KG	5%	5%	free
72169900	OTHER	KG	5%	5%	free
7217	WIRE OF IRON OR NON-ALLOY STEEL:
72171000	NOT PLATED OR COATED, WHETHER OR NOT POLISHED	KG	5%	5%	free
72171100	NOT PLATED OR COATED, WHETHEROR NOT POLISHED:	KG
72171110	MILLINERY WIRE;FENCING WIRE,ROUND/OVAL WIRE WITH A CROSS-SECTIONAL DIMENSION OF 1,63-4,88 MM,IN ROLLS; BALING/BINDING WIRE; WELDING WIRE, WITH A CROSS-SECTIONAL DIMENSION OF 0,6-2 MM.	KG
72171120	OTHER, WITH A CROSS-SECTIONAL DIMENSION OF 2 MM OR MORE BUT NOT EXCEEDING 4 MM	KG
72171190	OTHER	KG
72171200	PLATED OR COATED WITH ZINC	KG
72171300	PLATED OR COATED WITH OTHER BASE METALS:	KG
72171310	MILLINERY WIRE;FENCING WIRE,ROUND/OVAL WIRE WITH A CROSS-SECTIONAL DIMENSION OF 1,63-4,88 MM,IN ROLLS; BALING/BINDING WIRE; WELDING WIRE WITH A CROSS-SECTIONAL DIMENSION OF 0,6-2 MM (excl., IN EACH CASE, WIRE PLATED ORCOATED WITH COPPER).	KG
72171320	PLATED OR COATED WITH COPPER	KG
72171330	OTHER, PLATED OR COATED WITH TIN	KG
72171390	OTHER	KG
72171900	OTHER:	KG
72171910	MILLINERY WIRE;FENCING WIRE,ROUND/OVAL WIRE WITH A CROSS-SECTIONAL DIMENSION OF 1,63-4,88 MM,IN ROLLS; BALING OR BINDING WIRE;WELDING WIRE, WITH A CROSS-SECTIONAL DIMENSION OF 0,6-2 MM.	KG
72171990	OTHER	KG
72172000	PLATED OR COATED WITH ZINC	KG	5%	5%	free
72172100	NOT PLATED OR COATED, WHETHER ORNOT POLISHED:	KG
72172110	MILLINERY WIRE;FENCING WIRE,ROUND/OVAL WIRE WITH A CROSS-SECTIONAL DIMENSION OF 1,63-4,88 MM,IN ROLLS; BALING OR BINDING WIRE;WELDING WIRE, WITH A CROSS-SECTIONAL DIMENSION OF 0,6-2 MM.	KG
72172120	OTHER, WITH A CROSS-SECTIONAL DIMENSION OF 2 MM OR MORE BUT NOT EXCEEDING 4 MM	KG
72172190	OTHER	KG
72172200	PLATED OR COATED WITH ZINC	KG
72172300	PLATED OR COATED WITH OTHER BASE METALS:	KG
72172310	MILLINERY WIRE;FENCING WIRE,ROUND/OVAL WIRE WITH A CROSS-SECTIONAL DIMENSION OF 1,63-4,88 MM,IN ROLLS; BALING OR BINDING WIRE;WELDING WIRE, WITH A CROSS-SECTIONAL DIMENSION OF 0,6-2MM (excl., IN EACH CASE, WIRE PLATEDOR COATED WITH COPPER)	KG
72172320	PLATED OR COATED WITH COPPER	KG
72172330	OTHER, PLATED OR COATED WITH TIN	KG
72172390	OTHER	KG
72172900	OTHER
72172910	MILLINERY WIRE; FENCING WIRE, BEING ROUND OR OVAL WIRE WITHA CROSS-SECTIONAL DIMENSION OF 1,63-4,88 MM, INROLLS; BALING OR BINDING WIRE; WELDING WIRE, WITH A CROSS-SECTIONAL DIMENSIONOF 0,6-2 MM.	KG
72172990	OTHER	KG
72173000	PLATED OR COATED WITH OTHER BASE METALS	KG	5%	5%	free
72173100	Wire	KG
72173200	Wire	KG
72173300	PLATED OR COATED WITH OTHER BASE METALS	KG
72173900	OTHER	KG
72179000	OTHER	KG	5%	5%	free
7218	STAINLESS STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OFSTAINLESS STEEL.
72181000	INGOTS AND OTHER PRIMARY FORMS	KG	free	free	free
72181010	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM	KG
72181090	OTHER	KG
72189000	OTHER:
72189010	PIECES ROUGHLY SHAPED BY FORGING, CONTAINING BY MASS 12 % OR MORE OF CHROMIUM	KG
72189020	OTHER PIECES ROUGHLY SHAPED BY FORGING	KG
72189030	SLABS ANDSHEET BARS, CONTAINING BY MASS 12 % OR MORE OF CHROMIUM	KG
72189040	OTHER, CONTAINING BY MASS 12% OR MORE OF CHROMIUM	KG
72189090	OTHER	KG
72189100	OF RECTANGULAR (EXCLUDING SQUARE) CROSS-SECTION	KG	free	free	free
72189900	OTHER	KG	free	free	free
72189910	FLAT-ROLLEDPRODUCTS OF STAINLESS STEEL,OF A WIDTH OF 600 MM OR MORE.	KG
72189920	FLAT-ROLLEDPRODUCTS OF STAINLESS STEEL,OF A WIDTH OF 600 MM OR MORE.	KG
72189990	FLAT-ROLLEDPRODUCTS OF STAINLESS STEEL,OF A WIDTH OF 600 MM OR MORE.	KG
7219	FLAT-ROLLEDPRODUCTS OF STAINLESS STEEL,OF A WIDTH OF 600 MM OR MORE.
72191000	NOT FURTHER WORKED THAN HOT-ROLLED, INCOILS:
72191100	OF A THICKNESS EXCEEDING 10 MM	KG	5%	5%	free
72191110	CONTAINING BY MASS 12PER CENT OR MORE OF CHROMIUM	KG
72191190	OTHER	KG
72191200	OF A THICKNESS OF 4,75 MM OR MORE BUT NOT EXCEEDING 10 MM	KG	5%	5%	free
72191210	CONTAINING BY MASS12 PER CENT OR MORE OF CHROMIUM	KG
72191290	OTHER	KG
72191300	OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4,75 MM	KG	5%	5%	free
72191310	CONTAINING BY MASS12 PER CENT OR MORE OF CHROMIUM	KG
72191390	OTHER	KG
72191400	OF A THICKNESS OF LESS THAN 3 MM	KG	5%	5%	free
72191410	CONTAINING BY MASS12 PER CENT OR MORE OF CHROMIUM	KG
72191490	OTHER	KG
72192000	NOT FURTHER WORKED THAN HOT-ROLLED,NOT IN COILS:
72192100	OF A THICKNESS EXCEEDING 10 MM	KG	5%	5%	free
72192105	CONTAININGBY MASS LESS THAN 12 PER CENT OF CHROMIUM AND OF A THICKNESS NOT EXC 100 MM,ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL	KG
72192110	CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM AND OF A THICKNESS NOT EXC50 MM (EXCL THAT ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL)	KG
72192115	OTHER,CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM	KG
72192120	CONTAINING BY MASS 12 PER CENT ORMORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS EXC 50 MMBUT NOT EXC 100 MM, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL	KG
72192125	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS EXC 50 MM BUT NOT EXC 100 MM, ROLLED IN A CLOSED BOX PASS OR A	KG
72192130	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS EXC 50 MM BUT NOT EXC 100 MM, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL	KG
72192135	CONTAINING BY MASS 12 PER CENTOR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF ATHICKNESS EXC 50 MM BUT NOT EXC 100 MM ROLLED IN A CLOSED BOX PASS OR AUNIVERSAL MILL	KG
72192140	CONTAININGBY MASS 12 PER CENT OR MORE OF CHROMIUM, OF A THICKNESS EXC 50 MM (EXC THATROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL)	KG
72192145	CONTAINING BY MASS 12PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF ATHICKNESS NOT EXC 50 MM	KG
72192150	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF ATHICKNESS NOT EXC 50 MM	KG
72192155	CONTAINING BY MASS 12 PER CENT OR MOREOF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS NOT EXC 50 MM	KG
72192160	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF ATHICKNESS NOT EXC 50 MM	KG
72192200	OF A THICKNESS OF 4,75 MM OR MORE BUT NOT EXCEEDING 10 MM	KG	5%	5%	free
72192210	CONTAINING BY MASS LESSTHAN 12 PER CENT OF CHROMIUM	KG
72192220	CONTAINING BY MASS 12PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF ATHICKNESS EXC 4,75 MM	KG
72192230	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS OF 4,75 MM	KG
72192240	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF ATHICKNESS EXC 4,75 MM	KG
72192250	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS OF 4,75 MM	KG
72192260	CONTAINING BY MASS 12 PER CENT OR MOREOF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS EXC 4,75 MM	KG
72192270	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS OF 4,75 MM	KG
72192280	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM	KG
72192300	OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4,75 MM	KG	5%	5%	free
72192310	CONTAINING BY MASS LESSTHAN 12 PER CENT OF CHROMIUM	KG
72192320	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING NICKEL OR MOLYBDENUM	KG
72192330	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING MOLYBDENUM BUT CONTAINING NICKEL	KG
72192340	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM CONTAINING NICKEL ANDMOLYBDENUM	KG
72192350	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING NICKEL BUT CONTAINING MOLYBDENUM	KG
72192400	OF A THICKNESS OF LESS THAN 3 MM	KG	5%	5%	free
72192405	CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM, OF A THICKNESSOF 0,5 MM OR MORE	KG
72192410	CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM, OF ATHICKNESSOF LESS THAN 0,5 MM	KG
72192415	CONTAINING BY MASS12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF ATHICKNESS OF 1,257 MM OR MORE	KG
72192420	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF ATHICKNESS OF 1,257 MM OR MORE	KG
72192425	CONTAINING BY MASS 12 PER CENT ORMORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM OF A THICKNESS OF 1,257 MM ORMORE	KG
72192430	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A THICKNESS OF 1,257 MM OR MORE	KG
72192435	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL ORMOLYBDENUM, OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72192440	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUMBUT CONTAINING NICKEL, OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72192445	CONTAINING BYMASS 12 PER CENT OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF ATHICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72192450	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72192455	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, OF A THICKNESS EXCEEDING 0,386 MM BUT LESS THAN 0,5 MM	KG
72192460	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, OF A THICKNESSNOT EXCEEDING 0,386 MM	KG
72193000	NOT FURTHER WORKED THAN COLD-ROLLED(COLD-REDUCED):
72193100	OF A THICKNESS OF 4,75 MM OR MORE	KG	5%	5%	free
72193105	CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM, OF A THICKNESS EXC 50 MM	KG
72193110	CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM, OF A THICKNESSNOT EXC 50 MM	KG
72193115	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, OF A THICKNESS EXC 50 MM	KG
72193120	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL ORMOLYBDENUM, OF A THICKNESS EXC 4,75 MM BUT NOT EXC 50 MM	KG
72193125	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS OF 4,75 MM	KG
72193130	CONTAININGBY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUTCONTAINING NICKEL, OF A THICKNESS EXC 4,75 MM BUT NOT EXC 50 MM	KG
72193135	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS OF 4,75 MM	KG
72193140	CONTAINING BYMASS 12 PER CENT OR MORE OF CHROMIUM, OF A THICKNESS EXC 4,75 MM BUT NOT EXC50 MM	KG
72193145	CONTAINING BY MASS 12 PER CENT OR MORE OFCHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS OF 4,75 MM	KG
72193150	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING NICKEL BUT CONTAINING MOLYBDENUM	KG
72193200	OF A THICKNESS OF 3 MM OR MORE BUT LESS THAN 4,75 MM	KG	5%	5%	free
72193210	CONTAINING BY MASS LESSTHAN 12 PER CENT OF CHROMIUM	KG
72193220	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING NICKEL OR MOLYBDENUM	KG
72193230	CONTAINING BY MASS 12% OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUMBUT CONTAINING NICKEL	KG
72193240	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, CONTAINING NICKELAND MOLYBDENUM	KG
72193250	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM	KG
72193300	OF A THICKNESS EXCEEDING 1 MM BUT LESS THAN 3 MM	KG	5%	5%	free
72193310	CONTAINING BY MASS LESSTHAN 12 PER CENT OF CHROMIUM	KG
72193320	CONTAINING BY MASS12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF ATHICKNESS OF 1,257 MM OR MORE	KG
72193330	CONTAINING BY MASS12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF ATHICKNESS OF LESS THAN 1,257 MM	KG
72193340	CONTAINING BY MASS12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAININGNICKEL, OF A THICKNESS OF 1,257 MM OR MORE	KG
72193350	CONTAINING BY MASS12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAININGNICKEL, OF A THICKNESS OF LESS THAN 1,257 MM	KG
72193360	CONTAINING BY MASS 12 PER CENT ORMORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS OF 1,257 MMOR MORE	KG
72193370	CONTAINING BY MASS 12 PER CENT OR MOREOF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS OF LESS THAN1,257 MM	KG
72193380	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING NICKEL BUT CONTAINING MOLYBDENUM	KG
72193400	OF A THICKNESS OF 0,5 MM OR MORE BUT NOT EXCEEDING 1 MM	KG	5%	5%	free
72193410	CONTAINING BY MASSLESS THAN 12 PER CENT OF CHROMIUM	KG
72193420	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING NICKEL OR MOLYBDENUM	KG
72193430	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING MOLYBDENUM BUT CONTAINING NICKEL	KG
72193440	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, CONTAINING NICKELAND MOLYBDDNUM	KG
72193450	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING NICKEL BUT CONTAINING MOLYBDENUM	KG
72193500	OF A THICKNESS OF LESS THAN 0,5 MM	KG	5%	5%	free
72193510	CONTAINING BY MASS LESSTHAN 12 PER CENT OF CHROMIUM	KG
72193520	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, OF A THICKNESSEXCEEDING 0,386 MM	KG
72193530	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, OF A THICKNESSNOT EXCEEDING 0,386 MM	KG
72199000	OTHER	KG	5%	5%	free
72199003	CONTAINING BY MASS LESS THAN 12 PER CENT OFCHROMIUM, OF A THICKNESS EXCEEDING 5 MM BUT NOT EXC 100 MM, ROLLED IN A CLOSEDBOX PASS OR A UNIVERSAL MILL NOT PLATED COATED OR CLAD	KG
72199005	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF A THICKNESS EXC. 5 MM BUT NOT EXC. 100 MM, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, PLATED, COATED OR CLAD	KG
72199007	CONTAINING BY MASS LESS THAN 12% OF CHROMIUM OF A THICKNESS EXC 50 MM (EXC THAT OF A THICKNESS NOT EXC 100 MM ROLLED IN A CLOSED	KG
72199009	CONTAININGBY MASS LESS THAN 12 % OF CHROMIUM, OF A THICKNESS OF 3 MM OR MORE BUT NOT EXC. 50MM (EXCL. THAT ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL) NOT PLATED, COATED ORCLAD, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72199013	CONTAINING BY MASS LESS THAN 12% OF CHROMIUM OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 3 MM NOT PLATED COATED OR CLAD NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72199015	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF A THICKNESS OF LESS THAN 0,5 MM, NOT PLATED, COATED OR CLAD, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72199017	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, PLATED, COATED OR CLAD WITHLEAD OR ZINC	KG
72199019	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, PLATED, COATED OR CLAD WITH CHROMIUM, NICKEL OR COPPER, NOT WITH ACORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72199023	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, PLATED, COATED OR CLAD WITH TIN	KG
72199025	OTHER, CONTAINING BY MASSLESS THAN 12 % OF CHROMIUM	KG
72199027	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS EXC. 5 MM BUT NOT EXC 100 MM, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL	KG
72199029	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOTCONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS EXC. 5 MM BUT NOT EXC.100 MM, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL	KG
72199033	CONTAINING BY MASS 12% OR MORE OF CHROMIUMCONTAINING NICKEL AND MOLYBDENUM OF A THICKNESS EXC 5 MM BUT NOT EXC 100 MMROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL	KG
72199035	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOTCONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A THICKNESS EXC. 5 MM BUT NOT EXC.100 MM, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL	KG
72199037	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM OF A THICKNESS EXC. 50 MM (EXCL. THAT OF A THICKNESS NOT EXC. 100 MM ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL	KG
72199039	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS EXC. 4,75 MM BUT NOT EXC. 50 MM (EXCL. THAT OF A THICKNESS EXC. 5 MM, ROLLED IN A CLOSED BOX PASS OR A	KG
72199043	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESSEXC. 4,75 MM BUT NOT EXC. 50 MM (EXCL. THAT OF A THICKNESS EXCEEDING 5 MM, ROLLEDIN A CLOSED BOX PASS OR AUNIVERSAL MILL)	KG
72199045	CONTAINING BY MASS 12 % OR MOREOF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS EXC. 4,75 MM BUT NOTEXC. 50 MM (EXCL. THAT OF A THICKNESS EXC. 5 MM, ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL	KG
72199047	CONTAINING BY MASS 12% OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM OF THICKNESS EXC. 4,75 MM BUT NOT EXC. 50 MM (EXCL. THAT OF THICKNESS EXC. 5 MM,	KG
72199049	CONTAINING BY MASS 12 % ORMORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS OF 3 MM OR MORE BUT NOTEXC. 4,75 MM	KG
72199053	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS OF 3 MM OR MORE BUT NOT EXC. 4,75 MM	KG
72199055	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM CONTAINING NICKEL AND MOLYBDENUM OF A THICKNESS OF 3 MM OR MORE BUT NOT EXC. 4,75 MM	KG
72199057	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A THICKNESS OF3 MM OR MORE BUT NOT EXC. 4,75 MM	KG
72199059	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN 3 MM	KG
72199063	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS OF1,257 MM OR MORE BUT LESS THAN 3 MM	KG
72199065	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN 3 M	KG
72199067	CONTAINING BY MASS 12 %OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A THICKNESS OF 1,257MM OR MORE BUT LESS THAN 3 MM	KG
72199069	CONTAINING BY MASS 12 % ORMORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS OF 0,5 MM OR MORE BUTLESS THAN 1,257 MM	KG
72199073	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS OF0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72199075	CONTAINING BY MASS 12% OR MORE OF CHROMIUM CONTAINING NICKEL AND MOLYBDENUM OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72199077	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72199079	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, OF ATHICKNESS EXC. 0,386 MM BUT LESS THAN 0,5 MM	KG
72199083	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, OF A THICKNESS NOT EXC. 0,386 MM	KG
7220	FLAT-ROLLEDPRODUCTS OF STAINLESS STEEL, OF A WIDTH OF LESS THAN 600 MM.
72201000	NOT FURTHER WORKED THAN HOT-ROLLED:
72201100	OF A THICKNESS OF 4,75 MM OR MORE	KG	5%	5%	free
72201105	OILS FOR RE-ROLLING, CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM	KG
72201110	CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM, OF A WIDTHEXC 500 MM AND A THICKNESS EXC 50 MM (EXCL THAT OF A THICKNESS NOT EXC 100 MM,ROLLED IN A CLOSED BOX PASS OR A UNIVERSAL MILL, AND COILS FOR RE-ROLLING)	KG
72201115	OTHER,CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM	KG
72201120	COILS FOR RE-ROLLING, CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM	KG
72201125	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, OF A WIDTH EXC 500 MM AND A THICKNESS EXC 50 MM (EXCL THOSE OF A THICKNESS NOT EXC 100 MM,	KG
72201130	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OF MOLYBDENUM, OF A WIDTH EXC	KG
72201135	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A WIDTH EXC 500 MM AND A THICKNESS OF 4,75 MM (EXCL COILS FOR RE-ROLLING)	KG
72201140	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A WIDTH EXC 500 MM AND A	KG
72201145	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A WIDTH EXCEEDING 500 MM AND A THICKNESS OF 4,75 MM (EXCLUDING COILS FOR RE-ROLLING)	KG
72201150	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH EXCEEDING 500 MM AND A	KG
72201155	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH EXCEEDING 500 MM AND A THICKNESS OF 4,75 MM (EXCLUDING COILS FOR RE-ROLLING)	KG
72201160	CONTAINING BY MASS12 PER SENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MYLYBDENUM, OF A WIDTHNOT EXCEEDING 500 MM	KG
72201165	CONTAINING BY MASS 12 PER CENTOR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A WIDTHNOT EXCEEDING 500 MM	KG
72201170	CONTAINING BY MASS 12 PER CENT ORMORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH NOT EXCEEDING500 MM	KG
72201175	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM(EXCLUDING COILS FOR RE-ROLLING)	KG
72201200	OF A THICKNESS OF LESS THAN 4,75 MM	KG	5%	5%	free
72201201	COILS FOR RE-ROLLING, CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM	KG
72201203	CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM, OF A WIDTH EXCEEDING 500 MM AND A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 3 MM (EXCLUDING COILS FOR RE-ROLLING)	KG
72201205	CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM, OF A WIDTH EXCEEDING 500 MM AND A THICKNESS OF LESS THAN 0,5 MM OR 3 MM OR MORE (EXCLUDING COILS FOR RE-ROLLING)	KG
72201207	CONTAINING BYMASS LESS THAN 12 PER CENT OF CHROMIUM, OF A WIDTH NOT EXCEEDING 500 MM AND ATHICKNESS EXCEEDING 0,386 MM BUT LESS THAN 1,257 MM	KG
72201209	OTHER,CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM	KG
72201211	COILS FOR RE-ROLLING, CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM	KG
72201213	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS OF 3 MM OR MORE (EXCLUDING COILSFOR RE-ROLLING)	KG
72201215	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS OF 3 MM OR MORE(EXCLUDING COILS FOR RE-ROLLING)	KG
72201217	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS OF 3 MM OR MORE (EXCLUDING COILS FOR RE-ROLLING)	KG
72201219	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A THICKNESS OF 3 MM OR MORE (EXCLUDING COILS FOR RE-ROLLING)	KG
72201221	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A WIDTH EXCEEDING 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN	KG
72201223	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A WIDTH EXCEEDING 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT	KG
72201225	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH EXCEEDING 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN 3 MM (EXCLUDING	KG
72201227	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A WIDTH EXCEEDING 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN	KG
72201229	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM (EXCLUDING COILS FOR RE-ROLLING)	KG
72201231	CONTAINING BY MASS 12 PER CENT OR MORE OFCHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS OF0,5 MM OR MORE BUT LESS THAN 1,257 MM (EXCLUDING COILS FOR RE-ROLLING)	KG
72201233	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM (EXCL COILS FOR RE-ROLLING)	KG
72201235	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOTCONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A THICKNESS OF 0,5 MM OR MOREBUT LESS THAN 1,257 MM (EXCL COILS FOR RE-ROLLING)	KG
72201237	CONTAINING BYMASS 12 PER CENT OR MORE OF CHROMIUM, OF A THICKNESS EXC 0,386 MM BUT LESS THAN0,5 MM (EXCL COILS FOR RE-ROLLING)	KG
72201239	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, OF A WIDTH EXC 500 MM AND OF A THICKNESS NOT EXC 0,386 MM (EXCL COILS FOR RE-ROLLING)	KG
72201241	CONTAINING BY MASS 12 PER CENT OR MORE OFCHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A WIDTH NOT EXC 500 MM AND OFA THICKNESS OF 1,257 MM OR MORE OR 0,386 MM OR LESS	KG
72201243	CONTAINING BY MASS 12 PER CENT OR MORE OFCHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A WIDTH NOT EXC500 MM AND OF A THICKNESS OF 1,257 MM OR MORE OR 0,386 MM OR LESS	KG
72201245	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM,CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH NOT EXC 500 MM AND OF A THICKNESSOF 1,257 MM OR MORE OR 0,386 MM OR LESS	KG
72201247	CONTAINING BY MASS 12 PER CENT OR MORE OFCHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A WIDTH NOT EXC500 MM AND OF A THICKNESS OF 1,257 MM OR MORE OR 0,386 MM OR LESS	KG
72202000	NOT FURTHER WORKED THAN COLD-ROLLED (COLD-REDUCED)	KG	5%	5%	free
72202001	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXC. 50 MM	KG
72202003	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF A THICKNESS OF 3 MM OR MORE (EXCL. THAT OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXC. 50 MM)	KG
72202005	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 3 MM	KG
72202007	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF AWIDTH EXC. 500 MM AND OF A THICKNESS OF LESS THAN 0,5 MM	KG
72202009	CONTAINING BY MASS LESS THAN 12 PERCENT OF CHROMIUM, OF A WIDTH NOT EXC. 500 MM AND OF A THICKNESS EXC. 0,386 MM BUTLESS THAN 1,257 MM	KG
72202011	CONTAINING BY MASS LESSTHAN 12 % OF CHROMIUM, OF A WIDTH NOT EXC. 500 MM & OF A THICKNESS OF 1,257 MMOR MORE OR LESS THAN 0,386 MM	KG
72202013	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXC. 50 MM	KG
72202015	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF AWIDTH EXC. 500 MM AND OF A THICKNESS EXC. 4,75 MM BUT NOT EXC. 50 MM	KG
72202017	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAININGNICKEL, OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXCEEDING 4,75 MM BUT NOT EXCEEDING 50 MM	KG
72202019	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXC. 4,75 MM BUT NOT EXC. 50 MM	KG
72202021	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXC. 4,75 MM BUT NOT EXC. 50 MM	KG
72202023	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS OF 3-4,75 MM	KG
72202025	CONTAINING BY MASS 12 %OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS OF 3 MMOR MORE BUT NOT EXC. 4,75 MM	KG
72202027	CONTAINING BY MASS 12PER CENT OR MORE OF CHROMIUM CONTAINING NICKEL AND MOLYBDENUM OF A THICKNESS OF3 MM OR MORE BUT NOT EXC. 4,75 MM	KG
72202029	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A THICKNESS OF 3 MM OR MORE BUT NOT EXCEEDING 4,75 MM	KG
72202031	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN 3 MM	KG
72202033	CONTAINING BY MASS 12% OR MORE OF CHROMIUM NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN 3 MM	KG
72202035	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN 3 MM	KG
72202037	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN 3 MM	KG
72202039	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72202041	CONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A THICKNESS OF0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72202043	CONTAINING BY MASS 12% ORMORE OF CHROMIUM CONTAINING NICKEL AND MOLYBDENUM OF A THICKNESS OF 0,5 MM ORMORE BUT LESS THAN 1,257 MM	KG
72202045	CONTAINING BY MASS 12 PER CENT OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72202047	OTHER, CONTAINING BY MASS 12 % OR MORE OFCHROMIUM, OF A WIDTH NOT EXC. 500 MM AND OF A THICKNESS NOT EXC. 0,386 MM	KG
72202090	OTHER	KG
72209000	OTHER	KG	5%	5%	free
72209001	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXC. 50 MM, NOT PLATED, COATED OR CLAD, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72209003	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 3 MM OR MORE BUT NOT EXC. 50 MM, NOT PLATED, COATED OR CLAD, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72209005	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 3 MM, NOT PLATED, COATED OR CLAD, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72209007	CONTAINING BY MASS LESS THAN 12 PER CENT OF CHROMIUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF LESS THAN 0,5 MM, NOT PLATED, COATED OR CLAD, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72209009	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF A WIDTH NOT EXC. 500 MM AND OF ATHICKNESS EXCEEDING 0,386 MM BUT LESS THAN 1,257 MM, NOT PLATED, COATED OR CLAD	KG
72209011	OTHER, CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, OF A WIDTH NOT EXCEEDING 500 MM(EXCL. THOSE OF A WIDTH NOT EXC. 250 MM, A LENGTH NOT EXC. 2 M & A THICKNESSOF 1,257 MM OR MORE, SEPARATED FROM EACH OTHER BY PACKING) NOT PLATED, COATED OR CLAD	KG
72209013	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXC. 50 MM	KG
72209015	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXC. 4,75 MM BUT NOT EXC. 50 MM	KG
72209017	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAININGNICKEL, OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXC. 4,75 MM BUT NOT EXCEEDING 50 MM	KG
72209019	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS EXC. 4,75 MM BUT NOT EXC. 50 MM	KG
72209021	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 3 MM OR MORE BUT NOT EXC. 4,75 MM	KG
72209023	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 3 MM OR MORE BUT NOT EXC. 4,75 MM	KG
72209025	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 3 MM OR MORE BUT NOT EXC. 4,75 MM	KG
72209027	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN 3 MM	KG
72209029	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN 3 MM	KG
72209031	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE BUT LESS THAN 3 MM	KG
72209033	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL OR MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72209035	CONTAINING BY MASS 12% OR MORE OF CHROMIUM NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72209037	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM	KG
72209039	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAININGMOLYBDENUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF 0,5 MM OR MORE BUT NOT EXC.	KG
72209041	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, OF A WIDTH EXC. 500 MM AND OF A THICKNESS OF LESS THAN 0,5 MM	KG
72209043	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM,NOT CONTAINING NICKEL OR MOLYBDENUM, OF A WIDTH NOT EXCEEDING 500 MM AND OF A THICKNESS OF 0,5MM OR MORE BUT LESS THAN 1,257 MM, NOT PLATED, COATED OR CLAD	KG
72209045	CONTAINING BY MASS 12 % OR MORE OFCHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A WIDTH NOT EXC. 500 MM &OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM, NOT PLATED, COATED OR CLAD	KG
72209047	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH NOT EXC. 500 MM AND OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM, NOT PLATED, COATED OR CLAD	KG
72209049	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A WIDTH NOT EXC. 500 MM AND OF A THICKNESS OF 0,5 MM OR MORE BUT LESS THAN 1,257 MM, NOT PLATED, COATED OR CLAD	KG
72209051	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, OF A WIDTH NOT EXC. 500 MM AND OF ATHICKNESS EXC. 0,386 MM BUT LESS THAN 0,5 MM, NOT PLATED, COATED OR CLAD	KG
72209053	OF A WIDTH NOT EXC. 250 MM, A LENGTH NOT EXCEEDING 2 M AND A THICKNESS OF 1,257 MM OR MORE, SEPARATED FROM EACH OTHER BY PACKING NOT PLATED, COATED OR CLAD	KG
72209055	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, NOTCONTAINING NICKEL OR MOLYBDENUM, OF A WIDTH NOT EXC. 500 MM AND OF A THICKNESS OF 1,257 MMOR MORE OR 0,386 MM OR LESS, NOT PLATED, COATED OR CLAD	KG
72209057	CONTAINING BY MASS 12 % OR MORE OFCHROMIUM, NOT CONTAINING MOLYBDENUM BUT CONTAINING NICKEL, OF A WIDTH NOT EXC. 500 MM &OF A THICKNESS OF 1,257 MM OR MORE OR 0,386 MM OR LESS, NOT PLATED, COATED OR CLAD	KG
72209059	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, CONTAINING NICKEL AND MOLYBDENUM, OF A WIDTH NOT EXC. 500 MM AND OF A THICKNESS OF 1,257 MM OR MORE OR 0,386 MM OR LESS, NOT PLATED, COATED OR CLAD	KG
72209061	CONTAINING BY MASS 12 % OR MORE OFCHROMIUM, NOT CONTAINING NICKEL BUT CONTAINING MOLYBDENUM, OF A WIDTH NOT EXC. 500 MM ANDOF A THICKNESS OF 1,257 MM OR MORE OR 0,386 MM OR LESS, NOT PLATED, COATED OR CLAD	KG
72209063	OF A WIDTH NOTEXC. 500 MM, PLATED, COATED OR CLAD WITH TIN	KG
72209065	PLATED, COATED OR CLAD WITH LEAD OR ZINC	KG
72209067	OF A WIDTH NOT EXC. 500 MMNOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION PLATED COATED OR CLAD WITHCHROMIUM NICKEL OR COPPER	KG
72209069	OF A WIDTH EXCEEDING 500 MM, WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION, NOT PLATED, COATED OR CLAD	KG
72209071	OTHER, OF AWIDTH NOT EXC. 500 MM AND A THICKNESS NOT EXC. 0,386 MM	KG
72209090	OTHER	KG
7221	BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF STAINLESS STEEL	KG	free	free	free
72210010	WIRE ROD, CONTAINING BYMASS 12 % OR MORE OF CHROMIUM	KG
72210020	OTHER WIRE ROD	KG
72210030	OTHER, CONTAINING BY MASS 12% OR MORE OF CHROMIUM	KG
72210090	OTHER	KG
7222	THER BARS AND RODS OF STAINLESS STEEL; ANGLES, SHAPES AND SECTIONS OF STAINLESS STEEL.
72221000	BARS AND RODS,NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED
72221010	CONTAINING BY MASS 12 PER CENT ORMORE OF CHROMIUM	KG
72221090	OTHER	KG
72221100	OF CIRCULAR CROSS-SECTION	KG	free	free	free
72221900	OTHER	KG	free	free	free
72222000	BARS AND RODS, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED	KG	free	free	free
72222005	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM OF A CROSS- SECTIONAL DIMENSION NOT EXC. 13 MM	KG
72222010	CONTAINING BY MASS 12 % OR MORE OF CHROMIUM OF A CROSS- SECTIONAL DIMENSION EXC. 13 MM	KG
72222020	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM OF A CROSS- SECTIONAL DIMENSION NOT EXC. 13 MM	KG
72222090	OTHER	KG
72223000	OTHER BARS AND RODS	KG	free	free	free
72223010	OF A LENGTH NOT EXC. 2 M, A WIDTH NOTEXC. 250 MM AND A THICKNESS NOT EXC. 30 MM, SEPARATED FROM EACH OTHER BY PACKING	KG
72223020	OTHER, CONTAINING BY MASS 12 % OR MORE OF CHROMIUM, HOT- ROLLED HOT-DRAWNOR EXTRUDED	KG
72223030	OTHER, CONTAINING BY MASS 12% OR MORE OF CHROMIUM	KG
72223040	OTHER, FORGED	KG
72223090	OTHER	KG
72224000	ANGLES, SHAPES AND SECTIONS	KG	free	free	free
72224010	CONTAINING BY MASS 12% OR MORE OF CHROMIUM, HOT-ROLLED	KG
72224020	OTHER, CONTAINING BY MASS 12PERCENT OR MORE OF CHROMIUM	KG
72224030	OTHER, HOT-ROLLED	KG
72224040	OTHER, FORGED	KG
72224090	OTHER	KG
7223	WIRE OF STAINLESS STEEL	KG	free	free	free
72230010	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, NOT PLATED, COATED OR CLAD	KG
72230020	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, PLATED, COATED OR CLAD WITH COPPER	KG
72230030	CONTAINING BY MASS LESS THAN 12 % OF CHROMIUM, PLATED, COATED OR CLAD WITH ZINC	KG
72230040	OTHER, CONTAINING BY MASSLESS THAN 12 % OF CHROMIUM	KG
72230090	OTHER	KG
7224	OTHER ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTSOF OTHER ALLOY STEEL.
72241000	INGOTS AND OTHER PRIMARY FORMS	KG	free	free	free
72249000	OTHER	KG	free	free	free
72249010	BLOOMS, BILLETS, SLABS AND SHEET BARS	KG
72249090	OTHER	KG
7225	LAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE.
72251000	OF SILICON-ELECTRICAL STEEL
72251010	COILS FOR RE-ROLLING	KG
72251020	OTHER, OF A THICKNESS OF LESS THAN 3 MM	KG
72251090	OTHER	KG
72251100	GRAIN-ORIENTED	KG	free	free	free
72251900	OTHER	KG	free	free	free
72252000	Of high speed steel	KG	free	free	free
72252010	Of a thickness of less than 3 mm	KG
72252090	Other Of high speed steel	KG
72253000	OTHER, NOT FURTHER WORKED THAN HOT-ROLLED, IN COILS	KG	5%	5%	free
72254000	OTHER, NOT FURTHER WORKED THAN HOT-ROLLED, NOT IN COILS	KG	5%	5%	free
72254010	OF A THICKNESS OF LESS THAN 3 MM	KG
72254090	OTHER	KG
72255000	OTHER, NOT FURTHER WORKED THAN COLD-ROLLED (COLD-REDUCED)	KG	5%	5%	free
72255010	OF A THICKNESS OF LESS THAN 3 MM	KG
72255090	OTHER	KG
72259000	OTHER:
72259005	OF A THICKNESS OF LESS THAN 3 MM, NOT PLATED, COATED OR CLAD, NOTWITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72259007	OF A THICKNESS OF 3 MM OR MORE, NOT PLATED, COATED OR CLAD, NOT WITHA CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72259010	OF A THICKNESS OF 3 MM OR MORE, NOT PLATED, COATED OR CLAD, NOT WITHA CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72259015	PLATED, COATED OR CLAD WITH TIN, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72259020	PLATED, COATED OR CLAD WITH LEAD OR ZINC, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72259025	PLATED, COATED OR CLAD WITH CHROMIUM, NICKEL OR COPPER, NOT WITH ACORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72259030	OTHER, NOT PLATED, COATED OR CLAD	KG
72259035	OTHER, PLATED, COATED OR CLADWITH LEAD, TIN OR ZINC	KG
72259040	OTHERWISE PLATED, COATED OR CLAD WITH ZINC	KG
72259060	PLATED, COATED OR CLADWITH ALUMINIUM	KG
72259090	OTHER	KG
72259100	ELECTROLYTICALLY PLATED OR COATED WITH ZINC	KG	5%	5%	free
72259200	OTHERWISE PLATED OR COATED WITH ZINC	KG	5%	5%	free
72259900	OTHER
72259910	Other	KG	free	free	free
72259990	Other	KG	5%	5%	free
7226	LAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM.
72261000	OF SILICON-ELECTRICAL STEEL:
72261010	COILS FOR RE-ROLLING	KG
72261020	OTHER, OF A WIDTH NOT EXCEEDING 500 MM AND OF A THICKNESS EXCEEDING 0,386 MM BUT LESSTHAN 1,257 MM	KG
72261025	OF A WIDTH NOT EXC. 500 MM AND OF A THICKNESS NOTEXC. 0,386 MM, PLATED COATED OR CLAD (EXCL THOSE PLATED, COATED OR CLAD WITH LEADTIN, ZINC, CHROMIUM, NICKEL OR COPPER)	KG
72261030	OTHER, OF A WIDTHEXC. 500 MM & OF A THICKNESS OF LESS THAN 3 MM	KG
72261090	OTHER	KG
72261100	GRAIN-ORIENTED	KG	free	free	free
72261900	OTHER	KG	free	free	free
72262000	OF HIGH SPEED STEEL	KG	free	free	free
72262010	COILS FOR RE-ROLLING	KG
72262020	OTHER, OF A WIDTH NOT EXCEEDING 500 MM AND OF A THICKNESS EXCEEDING 0,386 MM BUT LESSTHAN 1,257 MM	KG
72262025	OF A WIDTH NOT EXC. 500 MM & OF A THICKNESS NOT EXC. 0,386 MM, PLATED, COATED OR CLAD (EXCL. THOSE PLATED, COATED OR CLAD WITH LEAD, TIN, ZINC, CHROMIUM, NICKEL OR COPPER)	KG
72262030	OTHER, OF A WIDTH EXC. 500 MM & OF A THICKNESS OF LESS THAN 3 MM	KG
72262090	OTHER	KG
72269000	OTHER:
72269100	NOT FURTHER WORKED THAN HOT-ROLLED	KG	5%	5%	free
72269110	COILS FOR RE-ROLLING	KG
72269120	OTHER, OF A WIDTH NOT EXC 500 MM AND OF A THICKNESS EXC0,386 MM BUT LESS THAN 1,257 MM	KG
72269130	OTHER, OF A WIDTH EXC 500 MM AND OF A THICKNESS OF LESS THAN 3 MM	KG
72269190	OTHER	KG
72269200	NOT FURTHER WORKED THAN COLD-ROLLED (COLD REDUCED)	KG	5%	5%	free
72269210	COILS FOR RE-ROLLING	KG
72269220	OTHER, OF A WIDTH NOT EXC 500 MM AND OF A THICKNESS EXC0,386 MM BUT LESS THAN 1,257 MM	KG
72269230	OTHER, OFA WIDTH EXC 500 MM AND OF A THICKNESS OF LESS THAN 3 MM	KG
72269290	OTHER	KG
72269300	Electrolitically plated or coated with zinc	KG	5%	5%	free
72269400	Otherwise plated or coatedb with zinc	KG	5%	5%	free
72269900	OTHER	KG
72269905	OF A WIDTHEXC 500 MM AND OF A THICKNESS OF LESS THAN 3 MM, NOT PLATED, COATED OR CLAD, NOTWITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72269910	OF A WIDTHEXC 500 MM AND OF A THICKNESS OF 3 MM OR MORE, NOT PLATED, COATED OR CLAD, NOTWITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72269915	OF A WIDTH EXC 500 MM, PLATED, COATED OR CLAD WITH TIN, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72269920	OF A WIDTH EXC 500 MM, PLATED, COATED OR CLAD WITH LEAD OR ZINC, NOT WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION	KG
72269925	Plated or coated with tin,chromium or chromium and chromium oxides	KG	5%	5%	free
72269930	OF A WIDTH EXC 500 MM, NOT PLATED, COATED OR CLAD,CORRUGATED OR WITH OTHER PROFILE CONFIGURATION	KG
72269935	OF A WIDTH EXC 500 MM, PLATED, COATED OR CLAD WITH LEAD, TIN OR ZINC, CORRUGATED OR WITH OTHER PROFILE CONFIGURATION	KG
72269940	OF A WIDTH NOT EXCEEDING 250 MM, A LENGTH NOT EXCEEDING 2 M AND ATHICKNESS OF 1,257 MM OR MORE, SEPARATED FROM EACH OTHER BY PACKING, NOT PLATED,COATED OR CLAD	KG
72269945	OF A WIDTH NOT EXCEEDING 500 MMAND OF A THICKNESS EXCEEDING 0,386 MM BUT LESS THAN 1,257 MM, NOT PLATED,COATED OR CLAD
72269950	OTHER, OF A WIDTH NOT EXCEEDING 500 MM, NOT PLATED, COATED OR CLAD	KG
72269955	OF A WIDTH NOT EXCEEDING 500 MM, PLATED, COATED OR CLAD WITH LEAD, TINOR ZINC
72269960	OF A WIDTH NOT EXCEEDING 500 MM, PLATED, COATED OR CLAD WITHCHROMIUM, NICKEL OR COPPER	KG
72269965	OTHER, OF A WIDTH NOT EXCEEDING500 MM AND OF A THICKNESS NOT EXCEEDING 0,386 MM, PLATED, COATED OR CLAD WITHOTHER SUBSTANCES	KG
72269990	Other	KG	free	free	free
7227	ARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF OTHER ALLOY STEEL.
72271000	OF HIGH SPEED STEEL	KG	5%	5%	free
72271010	WIRE ROD	KG
72271090	OTHER	KG
72272000	OF SILICO-MANGANESE STEEL	KG	5%	5%	free
72272010	WIRE ROD	KG
72272090	OTHER	KG
72279000	OTHER	KG	5%	5%	free
72279010	WIRE ROD	KG
72279090	OTHER	KG
7228	OTHER BARSAND RODS OF OTHER ALLOY STEEL; ANGLES, SHAPES AND SECTIONS, OF OTHER ALLOY STEEL; HOLLOWDRILL BARS AND RODS,OF ALLOY OR NON-ALLOY STEEL.
72281000	BARS AND RODS, OF HIGH SPEED STEEL	KG	free	free	free
72281010	WIRE ROD	KG
72281020	OTHER, OF A LENGTH NOT EXC. 2 M, A WIDTH NOTEXC. 250 MM AND A THICKNESS NOT EXCEEDING 30 MM, SEPARATED FROM EACH OTHER BY PACKING	KG
72281030	OTHER, FORGED	KG
72281090	OTHER:	KG
72282000	BARS AND RODS, OF SILICO-MANGANESE STEEL	KG	5%	5%	free
72282010	WITH A CROSS-SECTION IN THE SHAPE OF "FLATTENED CIRCLES" OR "MODIFIED RECTANGLES" AS DEFINED IN NOTE 1(M) TO THIS CHAPTER (EXCLUDING FORGED AND STEEL FOR WELDING ELECTRODES)	KG
72282020	OTHER, OF A LENGTH NOTEXCEEDING 2 M, A WIDTH NOT EXCEEDING 250 MM AND A THICKNESS NOT EXCEEDING 30 MM,SEPARATED FROM EACH OTHER BY PACKING	KG
72282030	OTHER, FORGED	KG
72282040	OTHER BARS AND RODS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED, OF LEAD-BEARING FREE-CUTTING STEEL, NOT IN COILS, FOR THE MANUFACTURE OF WELDING ELECTRODES	KG
72282050	OTHER BARS AND RODS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED, FOR THE MANUFACTURE OF WELDING ELECTRODES	KG
72282060	OTHER	KG
72282090	OTHER	KG
72283000	OTHER BARS AND RODS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED	KG	5%	5%	free
72283010	WIRE ROD	KG
72283020	OTHER OF LEAD-BEARINGFREE CUTTING STEEL NOT IN COILS	KG
72283030	OTHER	KG
72283090	OTHER	KG
72284000	OTHER BARS AND RODS, NOT FURTHER WORKED THAN FORGED	KG	5%	5%	free
72284010	WITH A CROSS-SECTION IN THE SHAPE OF"FLATTENED CIRCLES" OR "MODIFIED" RECTANGLES" AS DEFINED IN NOTE 1(M) TO THIS CHAPTER
72284090	OTHER	KG
72285000	OTHER BARS AND RODS, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED	KG	5%	5%	free
72286000	OTHER BARS AND RODS	KG	5%	5%	free
72286010	OF A LENGTH NOT EXC. 2 M, A WIDTH NOT EXC. 250MM AND A THICKNESS NOT EXC. 30 MM, SEPARATED FROM EACH OTHER BY PACKING	KG
72286020	OTHER, OF LEAD-BEARING FREE CUTTINGSTEEL, NOT IN COILS	KG
72286030	OTHER, FORGED	KG
72286090	OTHER	KG
72287000	ANGLES, SHAPES AND SECTIONS	KG	5%	5%	free
72287010	FORGED	KG
72287020	HOT-ROLLED	KG
72287090	OTHER	KG
72288000	HOLLOW DRILL BARS AND RODS	KG	5%	5%	free
72288010	OF STEELCONTAINING BY MASS 12 PERCENT OR MORE OF CHROMIUM	KG
72288020	OF OTHER ALLOY STEEL	KG
72288090	OTHER	KG
72289000	HOLLOW DRILL BARS RODS	KG
72289010	OF STEEL, CONTAINING BY MASS MORE THAN 12 PERCENT CHROMIUM	KG
72289020	OF OTHER ALLOY STEEL	KG
72289090	- Other	KG
7229	WIRE OF OTHER ALLOY STEEL.
72291000	Of high speed steel	KG	free	free	free
72292000	OF SILICO-MANGANESE STEEL	KG	5%	5%	free
72292010	NOT PLATED, COATED OR CLAD	KG
72292020	PLATED, COATED OR CLAD WITH COPPER OR ZINC	KG
72292090	OTHER	KG
72299000	OTHER	KG	5%	5%	free
72299010	NOT PLATED, COATED OR CLAD	KG
72299020	PLATED, COATED OR CLAD WITH COPPER	KG
72299030	PLATED, COATED OR CLAD WITH ZINC	KG
72299090	OTHER	KG