CHAPTER 76: ALUMINIUM AND ARTICLES THEREOF
HS code	Description	Unit	Tariff General	Tariff EU	Tariff SADC
7601	UNWROUGHT ALUMINIUM.
76011000	ALUMINIUM, NOT ALLOYED	KG	free	free	free
76011010	INGOTS AND PIGS	KG
76011090	OTHER	KG
76012000	ALUMINIUM ALLOYS	KG	free	free	free
76012010	INGOTS AND PIGS, CONTAINING, BY MASS, MORE THAN 0,5 % TITANIUM OR 2,0 % BORON	KG
76012020	OTHER INGOTS AND PIGS	KG
76012030	OTHER,CONTAINING, BY MASS, MORE THAN 0,5 % TITANIUM OR 2,0 % BORON	KG
76012040	WAT VOLGENS MASSA MEER AS 0,5 % TITAAN OF 2 % BOOR BEVAT // CONTAINING, BY MASS, MORE THAN O,5 %	KG
76012090	OTHER	KG
7602	ALUMINIUM WASTE AND SCRAP	KG	free	free	free
7603	ALUMINIUM POWDERS AND FLAKES.
76031000	POWDERS OF NON-LAMELLAR STRUCTURE	KG	free	free	free
76032000	POWDERS OF LAMELLAR STRUCTURE; FLAKES	KG	free	free	free
76032010	POWDERS	KG
76032020	FLAKES	KG
7604	ALUMINIUM BARS, RODS AND PROFILES.
76041000	OF ALUMINIUM, NOT ALLOYED:
76041010	CIRCULAR ROD, IN COILS WITHOUT SPOOLS, OF A MASS EXC. 800 KG PER COIL	KG
76041020	BARS & RODS OF A MAXIMUM CROSS-SECTIONAL DIMENSION EXC. 7,5MM BUT LESS THAN 12,5 MM	KG
76041030	BARS & RODS OF A MAXIMUM CROSS-SECTIONAL DIMENSION OF 12,5MM OR MORE BUT NOT EXC. 160 MM	KG
76041035	BARS AND RODS, OF A MAXIMUM CROSS-SECTIONAL DIMENSION NOT EXCEEDING 160 MM	KG	5%	5%	free
76041040	OTHER BARS AND RODS	KG
76041050	HOLLOW PROFILES OF A MAXIMUM OUTSIDE CROSS- SECTIONALDIMENSION OF 6,5 MM OR MORE BUT NOT EXCEEDING 230 MM	KG
76041060	PROFILES (EXCL. HOLLOW PROFILES) OF A MAXIMUM CROSS- SECTIONAL DIMENSION NOTEXCEEDING 370 MM	KG
76041065	PROFILES, OF A MAXIMUM CROSS-SECTIONAL DIMENSION NOT EXCEEDING 370 MM	KG	5%	5%	free
76041090	OTHER	KG	free	free	free
76042000	OF ALUMINIUM ALLOYS:
76042100	HOLLOW PROFILES:
76042110	OF A MAXIMUM OUTSIDE CROSS-SECTIONAL DIMENSION OF 6,5-230MM & CONTAINING BY MASS NOT MORE THAN - 6 % OF COPPER OR - 6 % OF MAGNESIUM OR- 2 % OF SILICON OR - 8,5 % OF ZINC OR - 2 % OF MANGANESE OR - 2 % OF LEAD OR -4 % OF TITANIUM - OR 0,5 % OF BORON	KG
76042115	OF A MAXIMUM OUTSIDE CROSS-SECTIONAL DIMENSION NOT EXCEEDING 370 MM	KG	5%	5%	free
76042190	OTHER	KG	free	free	free
76042900	OTHER:
76042910	CIRCULAR ROD, IN COILS WITHOUT SPOOLS, OF A MASS EXC 800 KG PER COIL, OF A CROSS-SECTIONAL DIMENSION OF 9,5 MM OR MORE BUT NOT EXC 14,6 MM, CONTAINING, BY MASS, MORE THAN	KG
76042915	BARS AND RODS, OF A MAXIMUM CROSS-SECTIONAL DIMENSION EXCEEDING 7,5 MM BUT NOT EXCEEDING 160 MM	KG	5%	5%	free
76042920	OTHER CIRCULAR ROD, IN COILS WITHOUT SPOOLS, OF A MASS EXC 800 KG PER COIL	KG
76042930	BARS & RODS OF A MAXIMUM CROSS-SECTIONAL DIMEN. 7,5-12,5 MM (EXCL. PRODUCTS CONTAINING BY MASS MORE THAN - 6 %OF COPPER OR 6 % OF MAGNESIUM OR 2 % OF SILICON OR 8,5 % OF ZINC OR 2 % OFMANGANESE OR 2 % OF LEAD OR 4 % OF TITANIUM OR 0,5 % OF BORON)	KG
76042940	BARS & RODS OF A MAXIMUM CROSS-SECTIONAL DIMEN. 12,5-160 MM (EXCL. PRODUCTS CONTAINING BY MASS MORE THAN- 6 % OF COPPER OR 6 % OF MAGNESIUM OR 2 % OF SILICON OR 8,5 % OF ZINC OR 2 % OFMANGANESE OR 2 % OF LEAD OR 4 % OF TITANIUM OR 0,5 % OF BORON)	KG
76042950	OTHER BARS AND RODS	KG
76042960	PROFILES, OF A MAXIMUM CROSS-SECTIONAL DIMENSION NOT EXC. 370 MM(EXCL. PRODUCTS CONTAINING BY MASS, MORE THAN 6 % OF COPPER, OR 6 % OF MAGNESIUMOR 2 % OF SILICON, OR 8,5 % OF ZINC)	KG
76042965	PROFILES, OF A MAXIMUM CROSS-SECTIONAL DIMENSION NOT EXCEEDING 370 MM	KG	5%	5%	free
76042990	OTHER	KG	free	free	free
76049000	Aluminium bars, rods and profiles.- unspecified
7605	ALUMINIUM WIRE.
76051000	OF ALUMINIUM, NOT ALLOYED:
76051100	OF WHICH THE MAXIMUMCROSS-SECTIONAL DIMENSION EXCEEDS 7 MM:
76051105	CIRCULAR, IN COILS WITHOUT SPOOLS, OF A MASS EXCEEDING 800 KGCOIL	KG	5%	5%	free
76051110	OF A MASS EXC 20 KG / COIL	KG
76051180	OTHER, OF A MASS EXCEEDING 20 KGCOIL	KG	5%	5%	free
76051190	OTHER	KG	free	free	free
76051900	OTHER:
76051905	CIRCULAR, IN COILS WITHOUT SPOOLS, OF A MASS EXCEEDING 800 KGCOIL	KG	5%	5%	free
76051910	OF A MASS EXC. 20 KG/COIL	KG
76051980	OTHER, OF A MASS EXCEEDING 20 KGCOIL	KG	5%	5%	free
76051990	OTHER	KG	free	free	free
76052000	OF ALUMINIUM ALLOYS:
76052100	OF WHICH THE MAXIMUM CROSS-SECTIONAL DIMENSION EXCEEDS 7 MM	KG
76052105	Circular, in coils without spools, of a mass exc 800kg/coil,of a cross-sectional dim of 9.5 mm etc	KG	free	free	free
76052110	OF A MASS EXC. 20 KG/COIL	KG
76052170	Other, circular, in coils without spools, of a mass not exc 800kg/coil	KG	5%	5%	free
76052180	Other, of a mass exceeding 20kg/coil	KG	5%	5%	free
76052190	Other	KG	free	free	free
76052900	OTHER	KG
76052905	Other, circular, in coils without spools, of a mass exceeding 800kg/coil	KG	5%	5%	free
76052910	OF A MASS EXC. 20 KG/COIL	KG
76052980	Other, of a mass exceeding 20kg/coil	KG	5%	5%	free
76052990	Other	KG	free	free	free
7606	ALUMINIUM PLATES,SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0,2 MM.
76061000	RECTANGULAR (INCLUDING SQUARE):
76061100	OF ALUMINIUM, NOT ALLOYED:
76061105	NON-SLIP FLOORING WITHPATTERNS IN RELIEF (TREAD PLATE)	KG
76061107	CONTAINING, BY MASS, NOT MORE THAN 99,9 PER CENT OF ALUMINIUM, LAMINATED OR COATED ON ONE OR ONBOTH SIDES WITH PAINT, ENAMEL OR PLASTICS [EXCLUDING NON-SLIP FLOORING WITH PATTERNS IN RELIEF (TREAD PLATE)]		13%	13%	free
76061110	OTHER,CONTAINING, BY MASS, MORE THAN 99,9 PER CENT OF ALUMINIUM	KG
76061115	OTHER, OF ATHICKNESS EXC. 0,4 MM, COATED ON ONE OR BOTH SIDES WITH PAINT OR ENAMEL, WITH ACORRUGATED OR OTHER PROFILE CONFIGURATION, NOT COILED	KG
76061117	CONTAINING, BY MASS, NOT MORE THAN 99,9 PER CENT OF ALUMINIUM, NOT COATED OR COVERED WITH PAINT,ENAMEL OR PLASTICS [EXCLUDING NON-SLIP FLOORING WITH PATTERNS IN RELIEF (TREAD PLATE) AND THOSEWHICH ARE PERFORATED]		13%	13%	free
76061120	OTHER, NOT COATED WITH PAINT OR ENAMEL, WITH A CORRUGATED OROTHER PROFILE CONFIGURATION, NOT COILED	KG
76061125	OTHER, WITH ACORRUGATED OR OTHER PROFILE CONFIGURATION, NOT COILED	KG
76061130	OTHER, OF A THICKNESS EXC 0,4 MM, COATED ON ONE SIDE WITH PAINTOR ENAMEL, NOT COILED	KG
76061135	OTHER, OF A THICKNESS EXC. 0,4 MM, COATED ON BOTH SIDES WITHPAINT OR ENAMEL, NOT COILED	KG
76061140	OTHER, NOT COATEDWITH PAINT OR ENAMEL, NOT COILED	KG
76061145	OTHER, COILED, OF A THICKNESS EXC. 0,4 MM, COATED ON ONE SIDE WITH PAINT OR ENAMEL (EXCL THOSE WHICH ARE PERFORATED)	KG
76061150	OTHER, COILED, OF THICKNESS EXC 0,4 MM,COATED ON BOTH SIDES WITH PAINT OR ENAMEL (EXCL. THOSE WHICH ARE PERFORATED)	KG
76061155	OTHER, COILED, NOT COATEDWITH PAINT OR ENAMEL	KG
76061190	OTHER	KG	free	free	free
76061200	OF ALUMINIUM ALLOYS:
76061205	NON-SLIP FLOORINGWITH PATTERNS IN RELIEF (TREAD PLATE)	KG
76061207	COATED OR COVERED ON ONE OR ON BOTH SIDES WITH PAINT, ENAMEL OR PLASTICS, OF A THICKNESS EXCEEDING 0,25 MM AND A WIDTH EXCEEDING 100 MM [EXCLUDING NON-SLIP FLOORING WITH PATTERNS IN RELIEF (TREAD PLATE) AND THOSE WHICH ARE PERFORATED]		13%	13%	free
76061210	OTHER OF THICKNESSEXC. 0,4 MM, COATED ON ONE OR BOTH SIDES WITH PAINT OR ENAMEL, WITH CORRUGATED OROTHER PROFILE CONFIGURATION, NOT COILED	KG
76061215	OTHER, NOT COATED WITH PAINT OR ENAMEL, WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION, NOT COILED	KG
76061217	NOT COATED OR COVERED WITH PAINT, ENAMEL OR PLASTICS [EXCLUDING NON-SLIP FLOORING WITH PATTERNSIN RELIEF (TREAD PLATE), THOSE WHICH ARE PERFORATED, AND THOSE CONTAINING BY MASS MORE THAN 0,5PER CENT OF COPPER, 6 PER CENT OF MAGNESIUM OR 4 PER CENT OF SIL		13%	13%	free
76061220	OTHER, WITH A CORRUGATED OR OTHER PROFILE CONFIGURATION, NOT COILED	KG
76061225	OTHER, CONTAINING, BY MASS, MORE THAN 0,5 PER CENTOF COPPER, OR 6 PER CENT OF MAGNESIUM OR 4 PER CENT OF SILICON	KG
76061230	OTHER, OF A THICKNESS EXC. 0,4 MM, COATED ON ONE SIDE WITH PAINTOR ENAMEL, NOT COILED	KG
76061235	OTHER, OF A THICKNESS EXCEEDING 0,4 MM, COATED ON BOTH SIDESWITH PAINT OR ENAMEL, NOT COILED	KG
76061240	OTHER, OF A THICKNESS EXC. 0,25 MM BUT NOT EXC. 0,5 MM, CONTAININGBY MASS, NOT LESS THAN 3 %BUT NOT MORE THAN 5 % OF MAGNESIUM & NOT MORE THAN0,5% OF MAGNESE, NOT COILED	KG
76061245	OTHER, NOT COATEDWITH PAINT OR ENAMEL, NOT COILED	KG
76061250	OTHER, COILED, OF THICKNESS EXC. 0,4 MMCOATED ON ONE SIDE WITH PAINT OR ENAMEL (EXCL. THOSE WHICH ARE PERFORATED)	KG
76061255	OTHER, COILED OF THICKNESS EXC. 0,4 MM,COATED ON BOTH SIDES WITH PAINT OR ENAMEL (EXCL. THOSE WHICH ARE PERFORATED)	KG
76061260	OTHER, COILED,OF THICKNESS EXC. 0,25 MM BUT NOT EXC. 0,5 MM, CONTAINING, BY MASS, NOT LESS THAN3 % BUT NOT MORE THAN 5 % OF MAGNESIUM & NOT MORE THAN 0,5 % OF MANGANESE (EXCL.THOSE WHICH ARE PERFORATED AND COATED WITH PAINT OR ENAMEL)	KG
76061265	OTHER, COILED, NOT COATEDWITH PAINT OR ENAMEL	KG
76061290	OTHER	KG	free	free	free
76069000	OTHER:
76069100	Of aluminium, not alloyed:
76069105	NON-SLIP FLOORINGWITH PATTERNS IN RELIEF (TREAD PLATE)	KG
76069107	CONTAINING, BY MASS, NOT MORE THAN 99,9 PER CENT OF ALUMINIUM, COATED OR COVERED ON ONE OR BOTHSIDES WITH PAINT, ENAMEL OR PLASTICS [EXCLUDING NON-SLIP FLOORING WITH PATTERNS IN RELIEF (TREADPLATE) AND THOSE WHICH ARE PERFORATED]		13%	13%	free
76069110	OTHER,CONTAINING, BY MASS, MORE THAN 99,9 PER CENT OF ALUMINIUM	KG
76069115	OTHER OF ATHICKNESS EXC. 0,4 MM COATED ON ONE OR BOTH SIDES WITH PAINT OR ENAMEL WITH ACORRUGATED OR OTHER PROFILE CONFIGURATION NOT COILED	KG
76069117	CONTAINING, BY MASS, NOT MORE THAN 99,9 PER CENT OF ALUMINIUM, NOT COATED OR COVERED WITH PAINT,ENAMEL OR PLASTICS [EXCLUDING NON-SLIP FLOORING WITH PATTERNS IN RELIEF (TREAD PLATE) AND THOSEWHICH ARE PERFORATED]		13%	13%	free
76069120	OTHER, NOT COATED WITH PAINT OR ENAMEL, WITH CORRUGATED OR OTHERPROFILE CONFIGURATION, NOT COILED	KG
76069125	OTHER, WITH ACORRUGATED OR OTHER PROFILE CONFIGURATION, NOT COILED	KG
76069130	OTHER CIRCLES, OF A DIAMETER NOT EXC. 1,25 M & OF A THICKNESS NOT EXC. 9 MM	KG
76069135	OTHER, OF A THICKNESS EXC 0,4 MM BUTNOT EXC 10 MM, COATED ON ONE SIDE WITH PAINT OR ENAMEL, NOT COILED	KG
76069140	OTHER, OF A THICKNESS EXC 0,4 MM BUTNOT EXC 10 MM, COATED ON BOTH SIDES WITH PAINT OR ENAMEL, NOT COILED	KG
76069145	OTHER, NOT COATEDWITH PAINT OR ENAMEL, NOT COILED	KG
76069150	OTHER, COILED, OF THICKNESS EXC. 0,4 MM COATED ON ONE SIDE WITH PAINT OR ENAMEL (EXCL. THOSE WHICH ARE PERFORATED)	KG
76069155	OTHER COILED, OF THICKNESS EXC. 0,4 MM, COATED ON BOTH SIDES WITH PAINT OR ENAMEL (EXCL. THOSE WHICH ARE PERFORATED)	KG
76069160	OTHER, COILED, OF A THICKNESS EXC. 0,2 MM, NOT COATED WITH PAINT OR ENAMEL	KG
76069190	OTHER	KG	free	free	free
76069200	OF ALUMINIUM ALLOYS:
76069205	NON-SLIP FLOORINGWITH PATTERNS IN RELIEF (TREADPLATE)	KG
76069207	COATED OR COVERED ON ONE OR ON BOTH SIDES WITH PAINT, ENAMEL OR PLASTICS, OF A THICKNESS EXCEEDING 0,25 MM AND A WIDTH EXCEEDING 100 MM [EXCLUDING NON-SLIP FLOORING WITH PATTERNS IN RELIEF (TREAD PLATE) AND THOSE WHICH ARE PERFORATED]		13%	13%	free
76069210	OTHER OF THICKNESSEXC. 0,4 MM, COATED ON ONE OR BOTH SIDES WITH PAINT OR ENAMEL, WITH CORRUGATED OROTHER PROFILE CONFIGURATION, NOT COILED	KG
76069215	OTHER, NOT COATED WITH PAINT OR ENAMEL, WITH CORRUGATED OR OTHERPROFILE CONFIGURATION, NOT COILED	KG
76069217	CONTAINING, BY MASS, NOT MORE THAN 99,9 PER CENT OF ALUMINIUM, NOT COATED OR COVERED WITH PAINT,ENAMEL OR PLASTICS [EXCLUDING NON-SLIP FLOORING WITH PATTERNS IN RELIEF (TREAD PLATE) AND THOSEWHICH ARE PERFORATED]		13%	13%	free
76069220	OTHER, WITH ACORRUGATED OR OTHER PROFILE CONFIGURATION, NOT COILED	KG
76069225	OTHER CONT., BY MASS MORE THAN 0,5 % OF COPPER, 6 % OF MAGNESIUM OR 4 % OF SILICON	KG
76069230	OTHER CIRCLES, OF A DIAMETER NOT EXC. 1,25 M & OF A THICKNESS NOT EXC. 9 MM	KG
76069235	OTHER, OF A THICKNESS EXC 0,4 MM BUTNOT EXC 10 MM, COATED ON ONE SIDE WITH PAINT OR ENAMEL, NOT COILED	KG
76069240	OTHER, OF A THICKNESS EXC 0,4 MM BUTNOT EXC 10 MM, COATED ON BOTH SIDES WITH PAINT OR ENAMEL, NOT COILED	KG
76069245	OTHER OF A THICKNESS EXC. 0,25 MM BUT NOT EXC. 0,5 MM CONTAINING BY MASS NOTLESS THAN 3 % BUT NOT MORE THAN 5 % OF MAGNESIUM & NOT MORE THAN 0,5 % OFMANGANESE NOT COILED
76069250	OTHER NOT COATED WITHPAINT OR ENAMEL NOT COILED
76069255	OTHER, COILED, OF THICKNESS EXC. 0,4 MMCOATED ON ONE SIDE WITH PAINT OR ENAMEL (EXCL. THOSE WHICH ARE PERFORATED)
76069260	OTHER, COILED, OF THICKNESS EXC. 0,4 MMCOATED ON BOTH SIDES WITH PAINT OR ENAMEL (EXCL. THOSE WHICH ARE PERFORATED)
76069265	OTHER COILED,OF THICKNESS EXC. 0,25 MM BUT NOT EXC. 0,5 MM, CONTAINING, BY MASS, NOT LESS THAN3 % BUT NOT MORE THAN 5 % OF MAGNESIUM & NOT MORE THAN 0,5 % OF MANGENESE (EXCL.THOSE WHICH ARE PERFORATED & COATED WITH PAINT OR ENAMEL)
76069270	OTHER, COILED, OF A THICKNESS EXC. 0,2 MM, NOT COATED WITH PAINT OR ENAMEL
76069290	OTHER	KG	free	free	free
7607	ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICSOR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCL. ANY BACKING) NOT EXC. 0,2 MM.
76071000	NOT BACKED:
76071090	Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2mm.- unspecified
76071100	ROLLED BUT NOT FURTHER WORKED	KG	13%	13%	free
76071900	OTHER:
76071910	ETCHED, OF A WIDTH NOT EXCEEDING 105 MM	KG	free	free	free
76071920	OF A THICKNESS OF0,1 MM OR MORE BUT NOT EXC 0,15 MM AND A WIDTH NOT EXC 40 MM, LACQUERED ON ONESIDE ONLY, NOT ETCHED OR PRINTED	KG
76071925	OTHER, SELF-ADHESIVE, COATED WITH GLASS MICROSPHERES	KG	free	free	free
76071930	OTHER, UNPRINTED	KG
76071990	OTHER	KG	13%	13%	free
76072000	BACKED:
76072010	LAMINATED TO PAPER OR PLASTICS & REINFORCED WITH GLASS ORSISAL FIBRE UNPRINTED	KG
76072020	UNPRINTED, OF A THICKNESS OF 0,1 MM OR MORE BUT NOT EXCEEDING 0,15 MM AND A WIDTH NOT EXCEEDING40 MM, LACQUERED ON ONE SIDE ONLY (EXCLUDING THAT LAMINATED TO PAPER OR PLASTICS AND REINFORCEDWITH GLASS OR SISAL FIBRE)		free	free	free
76072025	OTHER, SELF-ADHESIVE, COATED WITH GLASS MICROSPHERES	KG	free	free	free
76072030	OTHER, UNPRINTED	KG
76072090	OTHER	KG	13%	13%	free
7608	ALUMINIUM TUBES AND PIPES.
76081000	OF ALUMINIUM, NOT ALLOYED	KG	5%	5%	free
76082000	OF ALUMINIUM ALLOYS
76082010	OF AN OUTSIDECROSS-SECTIONAL DIMENSION OF 6,5-230 MM, CONTAINING, BY MASS,NOT MORE THAN 6 % OF COPPER OR 6 % OF MAGNESIUM OR 2 % OF SILICON OR8,5 % OF ZINC OR 2 % OF MANGANESE OR 2 % OF LEAD OR 4 % OF TITANIUMOR 0,5 % OF BORON	KG
76082015	Of an outside cross-sectional dimension not exceeding 230mm	KG	5%	5%	free
76082090	Other	KG	free	free	free
7609	ALUMINIUMTUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES).
76090010	OF AN INSIDE DIAMETER OF LESS THAN 12,7 MM	KG	10%	10%	free
76090090	OTHER	KG	free	free	free
7610	ALUMINIUM STRUCTURES (EXCL. PREFABRICATEDBUILDINGS OF HEADING NO.94.06) AND PARTS OF STRUCTURES (FOR EXAMPLE BRIDGES ANDBRIDGE-SECTIONS TOWERS LATTICE MASTS ROOFS ROOFING FRAMEWORKS DOORS AND WINDOWSAND THEIR FRAMES AND THRESHOLDS FOR DOORS BALUSTRADES P
76101000	DOORS, WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS	KG	10%	10%	free
76101010	Doors, windows and their frames and thresholds for doors
76101090	DOORS,WINDOWS AND THEIR FRMES AND TRESHOLDS FOR DOORS
76109000	OTHER	KG	10%	10%	free
76109010	CLAMPSSPECIALLY DESIGNED FOR ASSEMBLING SCAFFOLDING AND SIMILAR STRUCTURES	KG
76109090	OTHER	KG
7611	ALUMINIUM RESERVOIRS, TANKS, VATS AND SIMILAR CONTAINERS, FOR ANY MATERIAL (EXCLUDING COMPRESSEDOR LIQUEFIED GAS), OF A CAPACITY EXCEEDING 300 LI, WHETHER OR NOT LINED OR HEAT-INSULATED, BUTNOT FITTED WITH MECHANICAL OR THERMAL EQUIPMEN T		free	free	free
76110010	BARRELS AND DRUMS, FOR THEPACKING OR CONVEYANCE OF GOODS	KG
76110020	OTHER CONTAINERS FOR THE PACKING ORCONVEYANCE OF GOODS	KG
76110090	OTHER	KG
7612	ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILARCONTAINERS (INCL. RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (EXCL.COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXC. 300 L, WHETHER OR NOT LINED ORHEAT-INSULATED, BUT NOT FITTED WITH MECHA
76121000	COLLAPSIBLE TUBULAR CONTAINERS	KG	10%	free	free
76129000	OTHER:
76129010	BARRELS & DRUMS, OF ACAPACITY OF 180 L OR MORE	KG
76129020	MILK OR CREAM CANS	KG
76129030	OTHER DAIRY UTENSILS	KG
76129040	CANS OF A CAPACITY NOT EXCEEDING 500 ML	KG	10%	10%	free
76129090	OTHER	KG	free	free	free
7613	ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS	KG	free	free	free
76130010	OF A CAPACITY NOT EXC. 300 L	KG
76130090	OTHER	KG
7614	STRANDED WIRE, CABLES, PLAITED BANDS & THE LIKE, OF ALUMINIUM, NOT ELEC=TRICALLY INSULATED.
76141000	WITH STEEL CORE	KG	10%	10%	free
76141010	STRANDED WIRE, CABLES, CORDAGE & ROPE	KG
76141090	OTHER	KG
76149000	OTHER	KG	10%	10%	free
76149010	STRANDED WIRE, CABLES, CORDAGE & ROPE	KG
76149090	OTHER	KG
7615	TABLEKITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF OF ALUMINIUM POT SCOURERSAND SCOURING OR POLISHING PADS GLOVES AND THE LIKE OF ALUMINIUM SANITARY WAREAND PARTS THEREOF OF ALUMININIUM
76151000	TABLEKITCHEN OR OTHER HOUSEHOLD ARTICLES & PARTS THEREOF POT SCOURERS AND SCOURINGOR POLISHING PADS GLOVES AND THE LIKE:
76151010	BUCKETS	KG
76151020	OTHER HOLLOWWARE FOR TABLE OR KITCHEN USE	KG
76151030	SODA WATER SIPHONS	KG
76151040	CLOTHES HANGERS	KG
76151090	OTHER	KG
76151100	POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE	KG	20%	20%	13%
76151900	NDER:
76151920	HOLLOWWARE FOR TABLE OR KITCHEN USE (EXCLUDING BUCKETS)	KG	30%	30%	24%
76151990	OTHER	KG	20%	20%	13%
76152000	SANITARY WARE AND PARTS THEREOF	KG	20%	20%	13%
7616	OTHER ARTICLES OF ALUMINIUM.
76161000	NAILS, TACKS, STAPLES (EXCLUDING THOSE OF HEADING 83.05), SCREWS, BOLTS, NUTS, SCREW HOOKS, RIVETS, COTTERS, COTTER-PINS, WASHERS AND SIMILAR ARTICLES		free	free	free
76161010	BOLTS AND NUTS	KG
76161020	NAILS, TACKS, WASHERS, RIVETS ANDSCREWS	KG
76161090	OTHER	KG
76169000	OTHER:
76169005	POULTRY AND BIRD IDENTIFICATION RINGS	KG
76169010	HORSE, MULE, ASS AND OX SHOES	KG
76169015	SLUGS FOR IMPACT EXTRUSION	KG
76169020	WOVEN MATERIALS OF ALUMINIUM WIRE; EXPANDEDMETAL	KG
76169025	BAGS AND LABELS OF ALUMINIUM FOIL BACKED WITH PAPER OR PLASTICS, NOT PRINTED	KG
76169030	BOOT AND SHOE LASTS AND TREES	KG
76169035	FLOATS FOR FISHING NETS	NO
76169040	SPOOLS AND REELS, FOR FILM	NO
76169045	KNITTING NEEDLES AND CROCHET HOOKS	KG
76169050	BOBBINS OF A KIND USED WITH TEXTILEMACHINERY	KG
76169055	VENETIAN BLINDS	KG
76169090	OTHER	KG
76169100	CLOTH, GRILL, NETTING AND FENCING, OF ALUMINIUM WIRE	KG	free	free	free
76169900	OTHER
76169910	VENETIAN BLINDS	KG	10%	10%	free
76169920	STEPS AND LADDERS	KG	15%	15%	free
76169930	SLUGS FOR IMPACT EXTRUSION	KG	10%	free	free
76169990	OTHER	KG	free	free	free
76169999	Other articles of aluminium.- unallocatable
7626	Unspecified- unspecified